Panasonic NE-1054F, Owner'S Manual

- 14 -

How to Operate

Other Features 

A. To Activate Program Lock:

This procedure "Locks" the control panel Memory Pads into their programmed heating times 
and power levels. 

DO NOT OPEN THE DOOR

. The Display Window must be blank before the 

Program Lock feature can be activated.

Display Window

1.

•  Press and hold in the 

PROG.

 Pad until the 

display shows "P" and "L". (for 6 seconds)

• Program Lock feature is now activated.

NOTE:

  • Do not press 

PROG.

 Pad for longer than 30 seconds continuously, or false failure code may result.

• In "Program Lock"

a. The oven is started by pressing the desired Memory pad. There is no need to press the 

START

 pad.

b. The interrupt feature is deactivated-opening the door cancels the remaining time on the program.

c. The oven cannot be programmed until the program lock feature is deactivated.

B. To Release Program Lock:

This procedure deactivates "Program Lock" and activates all other features.
Oven reverts to a 2 touch operating mode (Memory Pad plus 

START

 Pad).

DO NOT OPEN THE DOOR. The Display Window must be blank before the Release Program 
Lock feature can be activated.

Display Window

1.

+

• Press the 

STOP/RESET

 Pad.

While pressing this pad, press the 

PROG.

Pad until the Display Window shows "P" (for 
6 seconds).

•  Program Lock Feature is deactivated, oven 

is now in "Program Unlock" mode.

NOTE:

  • Do not press 

PROG.

 Pad for longer than 30 seconds continuously, or a false failure code may result.

• In "Program Unlock"

a. Repeat and interrupt features are operational.

b. Memory Pads can be programmed.

c. Tone loudness control is operational.

IP5102_3BS80RP_Eng_10_150121.indd   14

IP5102_3BS80RP_Eng_10_150121.indd   14

2015-1-21   10:00:35

2015-1-21   10:00:35