Panasonic NE-1054F Owner'S Manual Download

Page: 9 / 18

- 9 -

How to Operate

HEATING

Open the door and place food in the oven cavity. Close the door.

"0" must be showing in the Display Window

A. Manual Single Stage Heating:

This feature gives the user maximum

exibility to set the oven to desired heating time and power level. Ideal for menus that

require various heating requirements.

Example: To heat for 2 minutes at High Power

Display Window

• Press the

POWER

Level Selector Pad one

time.

• Press the Memory Pads 2, 0 and 0.

• Press the

START

Pad.

Heating will start.
The time in the Display Window will count
down.

Beep tone will sound.

• All heating will stop.

When opening the door, the display will stop
blinking.

B. Manual 2 or 3 Stage Heating:

This feature allows you to set to begin heating at one power level then shift automatically to a different power level after the
designated amount of heating time.

Example: To heat for 2 minutes at Defrost power for 2 stage heating

Follow steps 1 and 2 above.

Display Window

• Press the

POWER

Level Selector Pad 5

times. Indicator will change each time the
pad is pressed.

• Press the Memory Pads 2, 0 and 0.

• Press the

START

Pad.

The total time for both stages will be
displayed. The oven lamp will be turned on.
Heating will start.

• The time in the Display Window will count

down.

• When oven shifts to the next stage, a single

beep tone will sound.

Beep tone will sound.

• All heating will stop.

When opening the door, the display will stop
blinking.

NOTE:

For a 3 stage heating cycle, select a power level again and set the cooking time, between steps 3 and 4 above.

SPECIAL NOTE: For both single and 2 or 3 stage heating

1. While heating, one touch on the

STOP/RESET

Pad stops the oven. You can restart by pressing the

START

Pad or a second

touch on the

STOP/RESET

Pad will cancel the selected program.

2. One touch on the

STOP/RESET

Pad, before the heating cycle is started, will cancel the selected program.

IP5102_3BS80RP_Eng_10_150121.indd 9

2015-1-21 10:00:33

Summary of Contents for NE-1054F



















Search results

Summary of Contents for NE-1054F

Reviews:

Related manuals for NE-1054F

Brands by name

Popular brands

Panasonic NE-1054F, Owner'S Manual

Search results

Summary of Contents for NE-1054F

Reviews:

Related manuals for NE-1054F

Brands by name

Popular brands