28 - Installation Instructions
Connecting Power Supply and Hose
2. Connect the water-drain hose to the
extended water-drain hose, and then
affix the spring clamp to it.
1
2
3. Run the extended water-drain hose
toward the right side (as viewed from
the front of the unit) and wind it in
one of the following patterns.
- When using the water drain hose,
water can be drained at the height of
appliance (approx. 85 cm) by the drain
pump contained in this appliance.
85 cm
- Do not roll the drain hose when using.
Also, do not arrange the drain hose in
the twisted or bent state. Water may not
be drained properly.
Caution
Do NOT let the tip of the
water-drain hose dip into the
drained water.
This can cause water to flow back into
the appliance.
- Left side connection
For a left side connection, the first
pattern is recommended.
- Right side connection
- Rear side connection
NH-P70G2_AUS_NZ.indb 28
2013/07/04 11:44:15