16
17
Trouble-shooting
Problem
Causes
Solution
No heating
The power plug has not been plugged in.
Insert the power plug.
The product is abnormal.
Have your product repaired by the specified
service agent.
The power switch is “
O
”.
Turn on the iron with the power switch
“
I
”.
The power indicator light is flashing.
Before using (the indicator is flashing
→
the indicator is on), wait for about 23
seconds.
No steam
The steam button is not pressed down.
Press down the
steam button
.
There is no water in the water tank.
Use the cup to add water to the
“
MAX
(Taiwan:
滿水
) ” position on the tank
window.
Bubbles accumulate in the main body.
Hold the main body and keep it vertical.
Keep the steam button pressed down.
The power switch is turned off during ironing.
Before using (the indicator is flashing →
the indicator is on), wait for about 23
seconds.
Problem
Causes
Solution
Trouble-shooting
English
English
The tripled powerful
steam indicator does
not light up
The steam button is not pressed and held for
10 seconds.
Press and hold the steam button for about
10 seconds.
No or little water is left in the water tank.
Use the cup to add water to the
“
MAX
(
Taiwan
:
滿水)
” position on the tank
window.
The tripled powerful
steam does not
continue to eject
The tripled powerful steam
is a strong steam that is ejected instantaneously, not continuous steam.
The automatic heating function is turned off
(lights up in green).
Turn off the power switch and turn it
on again.
Noise will be heard
when the product is
shaken
This sound comes from the pipe hitting the tank. It's normal.
There is a noise or
a sense of vibration
during operation
This is the sound or vibration caused by water pumping in the tank. It's normal.
This is the noise of temperature controller during operation, which is normal.
If the temperature controller in the main body is activated, the steam volume may decrease for a
while. The steam volume will get back to normal once the temperature is stable. The steam will
be invisible occasionally, depending on the ambient temperature and indoor brightness.
Water neither distilled nor pure was added in
the tank.
Drain the remaining water from the water
tank and use the cup to add distilled water
or pure water to the tank “
MAX
(
Taiwan
:
滿水)
” mark.
The steam vents are blocked up with dirt
or scale.
Have your product repaired by the specified
service agent.
The steam is
insufficient
Summary of Contents for NI -FS560
Page 18: ...MEMO MEMO ...
