English
08
English
09
Parts identification
Steamer head
Steam
selector
Holder
Steam selector
Nozzle
Water tank
Hanger
Water
tank
handle
Power base
Telescopic
pole hole
Hose hole
Cap
Open
Close
Water tank
Water inlet
Telescopic
pole
Ironing cloth
support rod
Hose
Power base
Steamer holder
Lock button
Power button
Power plug
Power cord
Power indicator
light
Steamer head
Hanger
Fixing nut
Crossbar
Water tank
Ironing cloth
Hook
Crossbar
Plug type may vary comply with respective country or region
requirement.
How to assemble
Be sure to assemble the product on a flat and stable floor.
1. Release the lock button on the power base, and insert the
telescopic pole into the telescopic pole hole on the power
base in the correct direction of installation (see the figure
for the direction of the ironing cloth support rod). Then,
press the telescopic pole down to the bottom and push the
lock button to lock.
Be aware of the direction of the ironing cloth support rod
during installation.
6. Place the steamer head into the
steamer holder on the hanger.
3. As shown in the figure, attach
the hanger to the telescopic
pole (at the small end). To do
so, align the telescopic pole
hole at the bottom end of the
hanger with the lower end of
the telescopic pole, And press
the hanger down until a "click"
is heard. Check that the spring
lock at the end of telescopic pole snaps into the small hole
on the wall of telescopic pole hole. Be aware of the
direction of the hanger and the telescopic pole during
installation.
5. Install the hose at the hose hole of
power base and then turn the fixing
nut clockwise to tighten until a "click"
sound is heard.
4. Stretch the ironing cloth on the
hanger and snap the crossbar
at the lower end into the front
end of the ironing cloth support
rod. Then, straighten the ironing
cloth as shown in the figure and
adjust the ironing cloth support
rod to the appropriate height.
Spring
lock
Telescopic
pole hole
2. Loosen the lock button on the telescopic pole, pull upwards
the telescopic pole to the maximum height, and push the
lock button to lock.
Ironing
cloth
support
rod
Shaded area represents
the hand-held area.
