a) Lift the Indicator light assembly from the Heat-insulated
plate. Remove the screws indicated by arrows and
lift the Heat-insulated plate.
b) Lift the Packing(c). (NI-JW670C/JW660T only)
１．
ＩＮＳＴＡＬＬＡＴ
ＩＯＮ ＯＦ ＨＥＡＴ‑ＩＮＳＵＬＡＴＥＤ ＰＬＡＴＥ
(ＡＴＴＡＣＨ ＴＨＥ ＨＡＮＤＬＥ)
Before installing the Heat-insulated plate, ought to turn
the Temperature selector dial in a clockwise direction
to the end of position.
７．
ＲＥＭＯＶＡＬ ＯＦ ＨＥＡＴ‑ＩＮＳＵＬＡＴＥＤ ＰＬＡＴＥ
Remove the Fixed plate screws by arrows and lift the
Auto-valve assembly, then remove the Disc bimetal.
８．
ＲＥＭＯＶＡＬ ＯＦ ＡＵＴＯ‑ＶＡＬＶＥ ＡＳＳＥＭＢＬＹ
ＤＩＲＥＣＴＩＯＮＳ ＦＯＲ ＲＥＡＳＳＥＭＢＬＹ
(ＲＥＡＳＳＥＭＢＬＹ
ＩＮ ＴＨＥ ＯＲＤＥＲ ＲＥＶＥＲＳＥＳ
ＦＯＲ ＴＨＡＴ ＯＦ ＤＩＳＡＳＳＥＭＢＬＹ.）
２．
ＩＮＳＴＡＬＬＡＴ
ＩＯＮ ＯＦ ＴＥＭＰＥＲＡＴＵＲＥ
ＳＥＬＥＣＴＯＲ ＤＩＡＬ
Before installing the Temperature selector dial,ought to
turn the Temperature selector dial to maximum temperature
position then install it into Water tank.
Temperature adjustor
Heat-insulated plate
Indicator
light
Packing(C)
Auto-valve assembly
Soleplate
Thermostat stopper
Soleplate
Temperature selector dial
Turn the Temperature
selector dial to maximum
temperature position
Temperature dial
supporter
―
5
―
