11
Engl
ish
How to use the “Power Shot” feature
The “Power Shot” feature provides extra steam which goes deep into the
garment and is helpful for removing stubborn wrinkles.
If you have not used the “Power Shot” feature in a long time, it is necessary
to clean the inside of the iron before using this feature on any clothes to be
ironed.
Simply test the “Power Shot” feature several times away from the ironing
board and clothes to be ironed. This will prevent brown spotting or water
spotting on the clothes.
1
1
Fill the Water Tank with tap water as
described in “How to fi ll the Water Tank”.
2
2
Position the iron Heel rest position and be
sure the Power Switch is set to “ ”.
3
3
Plug the Power Plug into socket.
4
4
Set the Power Switch to “ ” position.
The Thermostat Operating Indicator Light switches on.
5
5
Preheat the iron until the Thermostat
Operating Indicator Light switches out,
usually it takes about 1 minute.
6
6
Simply pump the Power Shot Button when
needed.
• Pump the Power Shot Button several times at the
beginning of each ironing session.
• Press the Power Shot Button in intervals of at least
2 seconds between use to prevent water spotting.
• Use a press cloth if necessary.
NI-JWT980̲960̲Eng.indd 11
NI-JWT980̲960̲Eng.indd 11
2015/11/12 10:06:56
2015/11/12 10:06:56
