10/16/2016
s0306000000.html
file:///C:/Users/sh.dehghani/Desktop/NNGX36WFOTSIMP_SIMMC0304019A3/viewing/SGML_VIEW_DATA/OT/NNGX36WF/SIMP/s0306000000.html#3.6
1/1
3.6 Confirm after repair
1. After repair or replacement of parts, make sure that the screws of the oven, etc. are neither loose nor
missing.
Microwaves might leak if screws are not properly tightened.
2. Make sure that all electrical connections are tight before inserting the plug into the wall outlet.
3. Check for microwave energy leakage. (Refer to procedure for measuring microwave evergy leakage.)
CAUTION
MICROWAVE RADIATION
DO NOT BECOME EXPOSED TO RADIATION FROM THE MICROWAVE GENERATOR OR OTHER PARTS CONDUCTING MICROWAVE ENERGY.
IMPORTANT NOTICE
1.The following components have potentials above 2000V while the appliance is operated.
* Magnetron
* High voltage transformer
* High voltagediode
* High voltage capacitor
Pay special attention to these components.
2.When the appliance is operated with the door hinge or magnetron fixed incorrectly, the microwave leakage can reach more than 5mW/cm2.After repair or exchange, it is very
important to check if magnetron and the door hinge is correctly installed.