13
starting to use
your oven
setting the clock
1.
• Press
clock
once.
Colon flashes.
2.
• Set time of day using
Time Dial.
Time appears in
the display window;
colon continues
flashing.
3.
• Press
clock
once.
Colon stops flash-
ing; time of day is
entered.
notes:
1. To reset the clock, repeat step 1-3.
2. The clock will retain the time of day as
long as the oven is plugged in and
electricity is supplied.
3. Clock is a 12-hour display.
4. Oven will not operate while colon is
flashing.
1.
• Plug into a properly
grounded electrical
outlet.
The oven automatical-
ly defaults to the impe-
rial measure system
(oz/lb).
Display Window
child safety lock
This feature prevents the electronic oper-
ation of the oven until cancelled. It does
not lock the door.
to set:
• Press
start
3 times.
The symbol
"
"
appears in the display
window.
The symbol
"
"
continues to be
displayed until Child
Safety Lock is can-
celled. Any button
may be pressed but
the microwave will
not start.
to cancel:
• Press
stop/reset
3
times.
The display will
return to colon or
time of day when
Child Safety Lock
has been cancelled.
IP4927_39Y45CP_00_140417:IP3020_38X03CP_11_100514.qxd 2014-4-17 10:37 Page 13
dial features
note:
The maximum programmable time using Time Dial is up to 90 minutes.
TIME CHOICE
Rotate the dial clockwise to increase the cooking time and rotate
the dial counter-clockwise to decrease the cooking time.
WEIGHT CHOICE
Rotate the dial clockwise to increase the weight and rotate the dial
counter-clockwise to decrease the weight setting.
SENSOR MENU CHOICE
Dial can be rotated in either direction to select the Sensor Menus.
NOTES:
1. You can set the Child Lock feature when
the display shows a colon or time of day.
2. To set or cancel child safety lock,
Start
or
Stop/Reset
must be pressed 3 times
within 10 seconds.
