12
Control Panel
Beep Sound:
When a pad is touched correctly, a beep will be heard.
If a pad is touched and no beep is heard, the unit did not or cannot accept the instruction.
When operating, the oven will beep twice between programmed stages. At the end of any
complete program, the oven will beep 5 times.
Notes:
• If there is no operation for 6 minutes after setting cooking program, the oven will
automatically cancel the cooking program. The display will return to clock or colon
display.
• The oven will enter stand-by mode after the last operation has completed. When in
stand-by mode, the backlight of the display will be reduced and the backlight of key will
be turned off.
• When in stand-by mode, it is necessary to open and close the oven door before operating
the oven.
• If no beep sound is heard, check “Beep ON/OFF” function feature (P14, 15).
Display Window
Step by step instructions
scroll for easy operation
Coffee/Milk
Pad
(
page 17)
Sensor Reheat/Cook
Pad
(
page 21)
Popcorn
Pad (
page 18)
Keep Warm
Pad
(
page 17)
Clock
Pad (
page 13)
Quick 30
Pad
(
page 17)
Timer
Pad (
page 25)
Inverter Turbo Defrost
Pad (
page 19)
Slider bar
(
page 14)
Touch or hold “+”/“-”,
swipe the slider bar
to select the cooking
options.
Power Level
Pad
(
page 16)
More
Pad (
page 18)
Less
Pad (
page 18)
Stop/Rest
Pad
Before cooking:
One touch
clears all your instructions.
During cooking:
One
touch temporarily stops the
cooking process. Another
touch cancels all your
instructions, and time of
day or colon appears in the
Display Window.
Start
Pad
After cooking program
setting, one touch allows
oven to begin functioning.
If door is opened or
Stop/
Reset
Pad is touched once
during oven operation,
Start
Pad must be touched again
to restart oven.
* The control panels
of
NN-SE995S/
SE795S
have same
key layout.
F0003BP20CP_En_150216.indd 12
F0003BP20CP_En_150216.indd 12
2015/5/4 8:57:22
2015/5/4 8:57:22