5
IMPORTANT SAFETY INSTRUCTIONS
(continued)
Roller Ring
1. The Roller Ring and oven
fl
oor should be cleaned frequently to prevent
excessive noise.
2. Always replace the Roller Ring and the Glass Tray in their proper positions.
3. The Roller Ring must always be used for cooking along with the Glass Tray.
IMPORTANT SAFETY INSTRUCTIONS
INSTALLATION AND
GROUNDING INSTRUCTIONS
Examine Your Oven
Unpack oven, remove all packing material and examine the oven for any dam-
age such as dents, broken door latches or cracks in the door. Notify dealer
immediately if oven is damaged.
DO NOT
install if oven is damaged.
Placement of Oven
1. The oven must be placed on a
fl
at, stable surface. Place the front surface of the
door 7.6 cm (3 inches) or more from the counter top edge to avoid accidental
tipping of the microwave oven during normal use. For proper operation, the oven
must have suf
fi
cient air
fl
ow. Allow 7.6 cm (3 inches) of space on both sides of the
oven and 5 cm (2 inches) of space on top of the oven.
(a)
DO NOT
block air vents. If they are blocked during operation, the oven may
overheat and be damaged.
(b)
DO NOT
place oven near a hot, damp surface such as a gas or electric
range, or dishwasher.
(c)
DO NOT
operate oven when room humidity is excessive.
2. This oven is manufactured for household use only. It is not approved or tested
for mobile vehicle, marine, or commercial use.
Installation
1.
DO NOT
block air vents. If they are blocked during operation, the oven may
overheat. If the oven overheats, a thermal safety device will turn the oven off.
The oven will remain inoperable until it has cooled.
2. If the oven is designed for installation into a wall cabinet, use the proper trim kit
available from a local Panasonic dealer. Follow all instructions packed with the
kit.
F0003BP20CP_En_150216.indd 5
F0003BP20CP_En_150216.indd 5
2015/5/4 8:57:21
2015/5/4 8:57:21
