Operation
NOTE:
The QR code used for microwave oven setup is attached inside
the product. Please open the door and scan the QR code to the
right of a key image on the front side of the product.
Pairing Method 3: User Guided Setup (UGS)
If the QR code on the device is lost or has been damaged and you cannot use Pairing Method #2, you can set up your
microwave and connect to Alexa using User Guided Setup (UGS).
1. Install the latest version of Alexa app on your smart device and login with your Amazon account.
2. Plug the microwave oven into a power outlet that is grounded.
3. Ensure that home wireless network is on.
4-a. If your Alexa app automatically find your microwave oven by showing popup dialog after app is opened,
press continue and please go to step.6.
5.
4-b. If your Alexa app automatically doesn't find your microwave oven or you try to connect with normal setup
6.
7.
mode, Press the Popcorn button for 3 seconds. The screen will display 'ENTER SETUP MODE'. Then the
microwave oven is ready for setup.
Open the Alexa App, tap the Devices icon in the lower right, and tap the “+” icon in the top right. Select
“Add Device” and “Microwave Oven” to begin set up for your microwave oven. Press "Panasonic".
Press "NEXT", When a screen with 2D Barcode appears, press "DON'T HAVE A BARCODE" to continue
setup. And then, follow the on-screen instructions to set up your microwave oven.
If stop blinking and is off, restart from the step 4-b .
When "CONNECTED" shows on the microwave LED display and the beep sounds, set up is complete.
After set up, the LED display will turn on the and show local time in your location.
NOTE:
It may take a few minutes for the LED display to show the correct local time.
Once set up is completed, it is automatically set up even after turning the power of the oven off and on.
NOTE:
When you delete the product from the Alexa app, you must set up again.
7. If stop blinking and is off, restart from the step 4-b.
12
How to disconnect with Alexa
If you no longer need Alexa connection, you can turn off this function.
Press and hold Defrost and Quick 30 button simultaneously for 3 seconds.
Your microwave will be back to initial setup.