Installation Instructions
(cont.)
EN21
●
Another installation
(under the kitchen counter connection)
Pass the water supply hose through the hole of the sink and fit on the protective sleeve. Depending on the
piping arrangement at your home, you may choose to connect directly to the supply valve or connect to the
supply valve together with other pipes through a three-way connector.
❶
protective sleeve
supply valve
hole of
the sink
water
supply
hose
screw
tight
Installation is
completed
protective
sleeve (bolt)
protective
sleeve (nut)
Important
・
Do not connect the dishwasher to the water heater's water pipe (do not use hot water).
・
The water temperature applicable for the dishwasher is 5 °C to 40 °C.
The following optional accessories are required, which can be purchased at the dealer.
optional accessories
water supply
hose (1)
three-way
connector (1)
gasket (3)
protective sleeve (bolt set) (1)
bolt
nut
①
Unscrew
②
Open in the
direction of
the arrow
●
splitting
Install the water supply hose to the supply valve
3
EN22
●
Do not miss out the gasket when installing (it may cause water leakage).
●
If it does not affect the usage of other water pipes, it is recommended to close the supply valve after
each operation.
❷
connect to the supply valve
supply valve
gasket
screw tight
three - way connector installation
direct installation
water supply hose
screw tight
screw
tight
other pipes
gasket
gasket
supply valve
three-way
connector
screw tight
water supply hose
■
Confirming the tap water pressure
●
Please use the appliance at an inflow water pressure of 0.05 MPa - 1 MPa. When operating the water tap in the
kitchen, be sure to install the specified pressure relief valve if the tap water pipe generates abnormal sounds
(water hammer phenomenon).
●
When the water tap is fully open, the rate of inflow is required to reach at least 8 L per minute.
●
Please contact the Service Centre to confirm the water pressure and rate of inflow.
Important
Recommendation
NP-TH1HK.indd 24
2018/11/29 17:28:50
Job Name
B685891_NP-TH1取説(香港)
Color
K
File Name
0024_NP-TH1HK.pdf
Refine Time
2018-11-29 17:30:48
Print Time
2018-12-10 15:25:01
Job Name
B685891_NP-TH1取説(香港)
Color
K
File Name
0024_NP-TH1HK.pdf
Refine Time
2018-11-29 17:30:48
Print Time
2018-12-10 15:25:01
English
Installation Instructions
(cont.)
EN21
●
Another installation
(under the kitchen counter connection)
Pass the water supply hose through the hole of the sink and fit on the protective sleeve. Depending on
the piping arrangement at your home, you may choose to connect directly to the supply valve or connect to
the supply valve together with other pipes through a three-way connector.
❶
protective sleeve
supply valve
hole of
the sink
water
supply
hose
screw
tight
Installation is
completed
protective
sleeve (bolt)
protective
sleeve (nut)
Important
・
Do not connect the dishwasher to the water heater's water pipe (do not use hot water).
・
The water temperature applicable for the dishwasher is 5 °C to 40 °C.
The following optional accessories are required, which can be purchased at the dealer.
optional accessories
water supply
hose (1)
three-way
connector (1)
gasket (3)
protective sleeve (bolt set) (1)
bolt
nut
①
Unscrew
②
Open in the
direction of
the arrow
●
splitting
Install the water supply hose to the supply valve
3
EN22
●
Do not miss out the gasket when installing (it may cause water leakage).
●
If it does not affect the usage of other water pipes, it is recommended to close the supply valve after
each operation.
❷
connect to the supply valve
supply valve
gasket
screw tight
three - way connector installation
direct installation
water supply hose
screw tight
screw
tight
other pipes
gasket
gasket
supply valve
three-way
connector
screw tight
water supply hose
■
Confirming the tap water pressure
●
Please use the appliance at an inflow water pressure of 0.05 MPa - 1 MPa. When operating the water tap in the
kitchen, be sure to install the specified pressure relief valve if the tap water pipe generates abnormal sounds
(water hammer phenomenon).
●
When the water tap is fully open, the rate of inflow is required to reach at least 8 L per minute.
●
Please contact the Service Centre to confirm the water pressure and rate of inflow.
Important
Recommendation
NP-TH1HK.indd 25
2018/11/29 15:04:15
Job Name
B685891_NP-TH1取説(香港)
Color
K
File Name
0025_NP-TH1HK.pdf
Refine Time
2018-11-29 15:13:01
Print Time
2018-12-10 15:25:02
