2
NR-AH181MS1N / AH181MK1N / AH181MT1N
1. Safety Cautions for Repairing
When you repair refrigerator, please kindly take care of following cautions.
Before repairing unit, unplug supply cord
• Before you repair refrigerato
r, unplug the supply cord.
Use authentic parts when repairing
• When you replace the parts, please use authentic parts to replace defective parts.
Caution during brazing
• When you use touch for brazing, please ensure ventilation. Otherwise, you will be
poisoned by carbon monoxide.
Pay attention to using refrigerant
• If refrigerant touches
fire
, the gas becomes poisonous gas.
Pay attention to getting electricity shock
• When you check the voltage of terminal, please do not touch the electricity parts
terminal.
• When you replace the parts, please wait three minutes at least for discharging capacito
r.
Check safety after repairing
• Check the screws, parts, lead wires to take in place.
•
And check the repairing portion whether circumferential parts are damaged or not.
• Check insulation resistance between supply plug and earth.
• When install refrigerato
r, check condition of supply cord and plug.
• Wipe o
ff the dust on plug.
Watch the hot parts
• During operation and after operation, compressor and pipes are hot.
•
Also, under these condition, heater are hot.
• Do not burn your
fingers when you touch it.
Pat attention to refrigerant
• Do not touch liguid refrigerant.
• Otherwise, your hands may be burnt.
Pay attention to edge of parts
• Otherwise, your
fingers
may be cut.
Pay attention to fins of evaporator and condenser.
• Otherwise, your
fingers
may be cut.
Before transportation, adjust adjustable bolt
• Otherwise, the
floor
may be damaged.
Do not touch the pipe after brazing
• Otherwise, your hands may be burnt.
1.1 Warning
1.2 Caution
