- 10 -
6. TEMPERATURE CONTROL
How to operate the “QUICK FREEZING” (Quick cool button)
If you want the refrigerator to freeze quickly in order to
preserve the food, press the “Quick Freezing” button
(green light LED turns on).
The system will operate immediately and will stop
operating automatically (green light LED turns off)
when it runs for 150 minutes.
And the operation will return to normal mode.
Remark
• If you want to stop the operation, press the “Quick Freezing”
button (green light LED turns off).
The system will return to normal mode.
• If the green light LED is flashing, it means that the defrosting
system is now working. The quick freezing system will start
the operation right after the defrosting operation is finished.
How to use the “ENERGY-SAVING” operation
When food storage is small or during nighttime and people out of home (when door opening frequency
is low), the “ENERGY-SAVING” operation saves electricity consumption by operating the compressor
at a lower speed than the normal operation.
How to save energy
• Press the “ENERGY SAVING” button. (green light turns on)
• Press the “ENERGY SAVING” button again to stop the operation. (green light turns off)
About energy saving
• Deodorizing function reduces.
• Interior temperature gets slightly higher.
• The “ENERGY SAVING” operation stops when the power cord is reconnected or after recovering from
a power failure.
• When the “ENERGY SAVING” is activated during “QUICK FREEZING”, the “ENERGY SAVING” starts
after completing the “QUICK FREEZING”
• Frequent opening of the doors raise the interior temperature.
(Higher interior temperature automatically activates normal operation on a temporary basis.)
NR-B37MV2 / NR-B41MV2
Energy Saving
button
Quick Freezing
button
