11
English
Installation
Installing the water filter
The water filter is not installed at the time the refrigerator is purchased.
Install the water filter provided with the refrigerator.
1
Remove the drawer of the Vitamin-Safe Zone.
(The 2° Zone drawer in the case of model NR-B54X1.)
2
Remove the filter panel.
Place your fingers in the cutout at the front of the filter panel, and
remove the filter panel.
Filter panel
1
2
3
Install the water filter and rotate it 90 degrees clockwise.
3
Water filter
4
Push the water filter down, and put the filter panel back in place.
4
Note:
● Run water through the Water dispenser until the water runs clear (15 glass (approx. 3 litre)). This will clean
the water supply system and remove air from the water supply hose.