Panasonic NR-BL268, Operating Instructions Manual

How to make ice cubes

How to clean the refrigerator

WATER LEVEL

> PP

 <

1

3

2

ICE CUBE TRAY

BOX ICE TRAY

WATER LEVEL LINE

STEP

1

. Fill water in the ice cube tray till the water level line.

2

. Put ice cube tray inside freezer, wait until ice is made.

3

. To remove ice cubes, suppress the frame with left 

hand and twist the dial ice cube tray clockwise with 

right hand. 

The ice cubes will drop into the box ice tray.

Remark:



Don't pour water into ice box for ice-making, 

otherwise the box may crack.

Alkaline or weak 

Alkaline

Kitchen detergents

(They crack plastic!)

Cleanser or soap 

powder

Benzine, thinner, alcohol, 

acid, petroleum

Scrubber

Hot Water

1

Interior cleaning

Wipe off the stain with warm water. When stains can not be 

removed easily, wipe them with warm water and mild liquid 

soap by using a soft cloth.

Then wipe the soap off using damp soft cloth.

Use lukewarm

water!

2

Exterior cleaning

Cleaning by using soft cloth with warm water and soap.

Then wipe off the soap with warm soft cloth.

3

Gasket door FC/PC



  Clean by wiping gently. This area, petroleum gel was applied 

to reduce the friction to the refrigerator body. Be careful not 

to wipe off them.

  The door opening seal is replaceable when reaching end of life.



  While cleaning, push it back to the groove if it comes off.

 Note:

 Do not use the following items. (Otherwise, the surface will be scratched.)

Glass trays FC / PC



Removing

1

.  Unhook the protrusion at the back by 

lift it upward and pull the tray outward 

until removing.



Attaching

2

.  Push the tray until it reaches the end 

lock.



Removing

1. 

Pull the front slide tray outward 

until it reaches the end.

2. 

Push the front slide tray 

downward the back tray until it 

reaches the end.

3. 

Raise both the trays up and take 

them out.



Attaching

1. 

Place two trays on both supporters.

2. 

Pull the lower slide tray upward and 

outward until it reaches the end.

3.

  Raise the front slide tray up and 

push it backward until it reaches 

the end.

2

3

3

2

1

Glass Slide tray

7