How to clean the refrigerator
How to make ice cubes with ice maker
WATER LEVEL
> PP
<
1
3
2
ICE CUBE TRAY
BOX ICE TRAY
WATER LEVEL LINE
ICE MAKER
Alkaline or weak
Alkaline
Kitchen detergents
(They crack plastic!)
Cleanser or soap
powder
Benzine, thinner,
alcohol, acid, petroleum
Scrubber
Hot Water
1
Interior cleaning
Wipe off the stain with warm water. When stains can not
be removed easily, wipe them with warm water and soap
by using a soft cloth.
Then wipe the soap off using damp soft cloth.
Use lukewarm
water!
2
Exterior cleaning
Cleaning by using soft cloth with warm water and soap.
Then wipe off the soap with warm soft cloth.
3
Gasket door FC/PC
Clean by wiping gently. This area, petroleum gel was
applied to reduce the friction to the refrigerator body.
Be careful not to wipe off them.
The door opening seal is replaceable when reaching
end of life. While cleaning, push it back to the groove if
it comes off.
Note:
Do not use the following items. (Otherwise, the surface will be scratched.)
STEP
1
. Fill water in the ice cube tray till the water
level line.
2
. Put ice cube tray inside Freezer room, wait
until ice is made.
3
. To remove ice cubes, suppress the frame
with left hand and twist the dial ice cube tray
clockwise with right hand.
The ice cubes will drop into the box ice tray.
Remark:
Don't pour water into ice box for ice-making,
otherwise the box may crack.
9
