Installation
●
The refrigerator LED lamp is specifically designed for this refrigerator, if the LED needs replacement
please contact Panasonic Service Center.
●
If there is no grounding wiring plug in refrigerator, it should be connected with grounding connection
to prevent electrical hazard.
●
When moving or shifting the refrigerator, remove ice tray, ice box and evap pan etc.
check that there is no water in the refrigerator.
LED lamp
Moving or shifting
The distance from the wall
●
The top of the refrigerator and the ceiling at least 5 cm.
●
The wall and the back of the refrigerator at least 10 cm.
●
The side of the refrigerator and the wall at least 5 cm.
Area around installed
●
Do not locate the refrigerator in a humid place as rust may form
and may cause electric leakage.
●
Do not locate the refrigerator exposing to direct sunlight as the
heat and sunlight will increase the temperature.
●
Do not locate the refrigerator near heat source such as cooking
stove or oven.
●
The refrigerator must be located in the place where there is good
air circulation.
●
In case of placing the refrigerator on an uneven surface, adjust
the adjuster bolt to make the refrigerator stands stably.
10 cm.
5 cm.
5 cm.
4
NR-BR34B_EN.indd 4
NR-BR34B_EN.indd 4
4/27/2560 BE 2:17 PM
4/27/2560 BE 2:17 PM
