18
Appendix
Concerning the user alert functions
The following user alert functions are activated when a door has been left ajar for a prolonged period of time or when the temperature inside the
refrigerator has risen.
Temperature display
Alarm
Front tower LED light
Door ajar
Continuous for 1 minute
Blinks
Sounds once
Blinks once
Continuous for 3 minutes
Blinks
Sounds twice
Blinks twice
Continuous for 5 minutes
Blinks*
Sounds continuously
Blinks continuously
Temperature rise inside
the refrigerator
Freezer: -12 °C or more
Blinks*
Sounds continuously
Normal operation
Fridge: 8 °C or more
Blinks*
Sounds continuously
Normal operation
*Blinks for 30 seconds every 30 minutes.
Removing and re-installing
Glass shelves
Raise the back part of the shelf slightly, and pull out the shelf.
To re-install the shelf, align it with the left and right guides, and push it into place.
a
b
Drawers
Pull the drawer out all the way, and while raising the back part of the drawer slightly, and pull out the
drawer.
To re-install the drawer, align it with the left and right guides, and push it into place.
a
c
b
Door shelves and sealed case door shelf
Push the shelf up from below, and remove it.
To re-install the shelf, align the left and right protrusions, and insert the shelf firmly down until it will
go no further.
Wine rack
Raise the back part of the wine rack slightly, and pull out the rack.
To re-install the rack, align it with the left and right guides, and push it into place.
a
b
Suspend shelf
Pull the suspend shelf out all the way, and while raising the back part of the suspend shelf slightly,
and pull out the suspend shelf.
To re-install the suspend shelf, align it with the left and right guides, and push it into place.
a
c
b
Icebox
Raise the icebox slightly, and pull the bottom part out toward you.
To re-install the icebox, first align its top part with the automatic ice maker, then push down its
bottom part and insert it firmly into place below as far as it will go.
●
When removing the icebox, take care not to spill the ice inside.
●
Before re-installing the icebox, take out the ice inside.
a
b
Ice/Water dispenser drain plate and water tray
Place your fingers in the cutout at the back of the drain plate, and remove the tray.
Take hold of the protrusion in the water tray, and remove the tray.
When re-installing the trays, install the water tray first, and then install the drain plate.
Drain plate
Water tray
Summary of Contents for NR-BS53VW3
Page 255: ......
