- 9 -
6. DISASSEMBLY INSTRUCTION
6.1 Led Cover
- Take off by use small screwdriver put between gaps of led cover with plate duct PCT at lock as Fig. 1
- Use small screwdriver push up the led cover for lock loose.
- Change led lamp by take off at lead wire connection as Fig. 2
- After change led cover or led lamp, put led cover at the top side and slide up in lock position as Fig. 3
- Use hand hit carefully at the right side of led cover from the top pass to bottom as Fig. 4
NR-BT223 / BT263
Fig. 1
Fig. 2
Fig. 3
Fig. 4
