Temperature control
The temperature can be adjusted for Min - Max levels. Press “Select” to select the area to
control the temperature: Fridge, -3
o
C cold storage room, Freezer. After that, press “Temp
Control” to set the temperature level.
“Fridge”
“Max” lower than “Med” by 2°C ~ 3°C
“Med” approx. 1°C ~ 6°C
“Min” higher than “Med” by 2°C ~ 3°C
“Prime Fresh”
“Max” lower than “Med” by 2°C ~ 3°C
“Med” approx. -5°C ~ -1°C
“Min” higher than “Med” by 2°C ~ 3°C
“Freezer”
“Max” lower than “Med” by 2°C ~ 3°C
“Med” approx. -23°C ~ -17°C
“Min” higher than “Med” by 4°C ~ 5°C
Remark:
While operating the refrigerator for the first time, after connecting the plug, adjust the
temperature to “Med” position of each control and leave it for 24 hours for the effective cooling
operation. After that, adjust the temperature as you prefer. If you want to save energy, do not
adjust the temperature lower than the actual operating condition.
ECONAVI operation
Detect opening and closing of door and brightness around refrigerator, and automatically
controls operation to save energy
1
.
ECONAVI operation
●This refrigerator will learn the lifestyle patterns of your family from opening and the time
periods of infrequent use to perform ECONAVI operation.
●The refrigerator learns your lifestyle pattern from the previous 3 weeks, and uses what it has
learned from the 4th week onwards.
Setting for enabling ECONAVI operation
●ECONAVI operation is enabled automatically only when the temperature control of the
Freezer room is set to “Med”.
●However, ECONAVI does not operate while “Quick Freezing” or “Prime Fresh+” mode is
operating.
●It is not possible to forcefully start ECONAVI operation.
Remark:
1
Effectiveness differs depending on the ambient temperature, ambient brightness,
number of times and when doors are opened and closed, and state in which food is
stored.
8
