For safety, the ground connection should be done
(For a refrigerator with plug (2-pin plug) without any ground wire)
The ground connection will allow prevention of danger resulted from electricity leakage.
The ground connection can be performed in 2 ways as follows:
1. In the case that the grounding receptacle having been
prepared for the socket (plug socket), connect the ground
wire to the screw used for ground connection at the bottom
rear of the refrigerator (regarding the screw used for ground
connection, please notice the symbol) as shown in the
illustration
1
.
2. In the case that the socket (plug socket) having not been
provided with any grounding receptacle, connect the ground
wire to the screw at the bottom of the refrigerator, (as regards
the screw used for ground connection, please notice the
symbol). And then connect the other end to the ground rod as
shown in the illustration
2
.
Prohibited spots for ground connection
●
Gas pipes and water supply pipes (dangers from electric shock or explosion).
●
The ground wires of telephone cords and lightning rods (dangers from lighting).
Preparations
When replace room lamp, shall be disconnect supply cord to prevent electric shock.
1. Disconnect supply cord.
2. Remove room lamp cover by loosen the
screw, then pull room lamp cover from
backside downward you to remove
(following picture
).
3. Replace proper lamp (E14 240V 15W max.)
surely.
4. When finish replacing room lamp, assembly
room lamp cover by reverse proper method.
Remark
1. Be careful while replacing a room lamp, you may get injured from touching a hot lamp.
2. Do not press front side when removing room lamp cover.
Model : NR-BW414V Series and NR-BW414X Series
Model : NR-BW464V Series and NR-BW464X Series
The Refrigerator room lamp, specially designed for this refrigerator, does not function on individual
replacing.
If you need to replacement, please contact Panasonic Service Center.
Pull the
room lamp
cover from
backside
downward you
to remove
Room lamp
cover
How to replace room lamp
Model : NR-BW414S Series and NR-BW414M Series
Grounding
receptacle
1
2
Ground
wire
Illustration for the
ground connection
Installation
Installation /
How to replace room lamp
8
How to
use
NR-BW414/NR-BW464_EN,VT.indd 8
2/19/10 11:29:13 AM
