NR-BY558/NR-BY55B/NR-BY608
14.2 Insert the D-joint Pipe (Capilary tube into Dryer)
14.2.1 Insert the capillary tube into the position of the mesh.(Fig.1)
Fig.1
Fig.2
Fig.3
Fig.4
14.2.2 Mark the position where the tube touched the mesh.(Fig.2)
14.2.3 Return the capillary tube about 5 mm.(Fig.3)
14.2.4 Bend the capillary tube. (Fig.4)
- 27 -