●
Check if the refrigerator is located on a stable, level
fl
oor and is installed correctly.
Use the adjustable bolt if required to level the refrigerator. (P.5)
●
Check if there is any object in contact with the refrigerator.
●
Cracking sound within caused by the parts adjusting temperature which is normal.
●
After installation, the refrigerator may make loud noise.
The noise will be less when the refrigerator has been cooled.
Troubleshooting
●
Check to be sure that the temperature control lever is at the proper position. (P.7)
●
Check to ensure that the refrigerator is not overloaded with foodstuffs or that
hot food have been placed in the refrigerator.
●
Is the refrigerator exposed to direct sunlight or a heat source? (P.4)
●
Is the refrigerator door completely closed?
●
Is the refrigerator door opened frequently?
●
Check that the plug and wall socket are in good condition.
●
Check if there is any problem with the mains fuse or house wiring.
●
Check by unplugging for 10 minutes and plugging back in.
●
Was the food placed near the cold air duct?
●
If the temperature control has been set to “Max” try adjusting the temperature
control to the “Min” setting.
●
Has the food been placed in the chilled case?
●
Condensation may appear on the surface of the cabinet when humidity is high
or air circulation around the unit is poor.
●
If there is condensation inside, check if the door is completely closed.
Is the refrigerator frequently opened or left open for a long time?
Have any hot foodstuffs been placed inside the refrigerator?
The refrigerator is
not cool enough.
The refrigerator
does not operate.
Check here.
In these cases?
The refrigerator
generates noise.
Food becomes
frozen
Condensation
generated inside and
outside the cabinet /
surface of door.
15
NR-BY55BP, NR-BY55BV(EN)(AU).indd 15
NR-BY55BP, NR-BY55BV(EN)(AU).indd 15
6/30/2559 BE 10:14 AM
6/30/2559 BE 10:14 AM
