For safety, the grounding connection should be done
(For a refrigerator with plug (2-pin plug) without any grounding wire)
The grounding connection will allow prevention of danger resulted from electricity leakage.
The grounding connection can be performed in 2 ways as follows:
1. In the case that the grounding receptacle has been
prepared for the socket (plug socket), connect the
grounding wire to the screw used for grounding connection
at the bottom rear of the refrigerator (regarding the screw
used for grounding connection, please notice the
symbol) as shown in the illustration
1
.
2. In the case that the socket (plug socket) has not been
provided with any grounding receptacle, connect
the grounding wire to the screw at the bottom of the
refrigerator, (as regard to the screw used for grounding
connection, please notice the
symbol). And then
connect the other end to the grounding rod as shown in
the illustration
2
.
Prohibited spots for grounding connection
●
Water supply pipes and gas pipes (dangers from electric shock or explosion).
●
The grounding wires of telephone cords and lightning rods (dangers from lightning).
Grounding
receptacle
Grounding wire
Illustration for the
grounding connection
1
2
M
Install the refrigerator in the following locations.
M
Has a heat radiating space been provided
around the refrigerator?
●
Locate away from direct sunlight
or heat
●
Place in a well ventilated location
to avoid rust
●
Position on a level and even
surface
→
On carpet, mats or vinyl
fl
oors
place a plate underneath the
refrigerator
●
Place the refrigerator away from other devices to
prevent noise and incorrect image display on TV's
and other devices
●
Allow access to the power plug for easy cleaning
to avoid dust accumulation.
Installation
3 cm or more
both left and right
5 cm or more
at the back of
the refrigerator
8.6 cm or more
above the
refrigerator
Before using for product.
4
NR-BY55BP, NR-BY55BV(EN)(AU).indd 4
NR-BY55BP, NR-BY55BV(EN)(AU).indd 4
6/30/2559 BE 10:14 AM
6/30/2559 BE 10:14 AM
