7
Temperature control (Fine adjustment mode)
Temperature control
Slide the lever to operate the "REFRIGERATOR CONTROL" when changing the temperature of
refrigerator compartment.
Temp. control lever
TEMP . CONTROL REFRIGERTOR COMPARTMANT
“MIN”
Higher than “MED” by approximately 2°C ~ 3°C
“MED”
Approximately 1°C ~ 6°C
“MAX”
Lower than “MED” by approximately 2°C ~ 3°C
Freezer Room temperature control
“Max” Lower than Med by approximately 2°C ~ 3°C
“Med” Approx by approximately -23°C ~ -17°C
“Min” Higher than Med by approximately 2°C ~ 3°C
Temperature in Chilled case is automatically set at approximately -3°C ~ 3°C
Remark
While operating the refrigerator for the fi rst time, after connecting the plug, adjust the temperature to “Med” position for
each control and leave it for 24 hours for the effective cooling operation. After that, adjust the temperature as you prefer.
If you want to save the energy, do not adjust the temperature lower than the actual operating condition.
This refrigerator is specially designed for appropriate use, which can adjust the temperature level to 9 detailed levels with
the following.
How to operate the “9 levels” mode
For the Freezer room
1. Set LED display to “Min” with the “Freezer” button.
2. Press and hold the “Freezer” button (for more than 10 seconds) until the LED display return to show at “Min” position.
3. Set “9 levels” mode following below table mentioned by pressing the “Freezer” button.
Cooling Level
Minimum
Maximum
Lighting
Blinking
LED Display table
Not lighting
LED DISPLAY
Step
To reset the setting “9 levels” mode
Repeat step 1 and 2, then the refrigerator will return to normal operation mode.
Remark:
Temperature control varies depends on the changing of environment and food storage quantity.
1
2
3
4
5
6
7
8
9
NR-BY55BP, NR-BY55BV(EN)(AU).indd 7
NR-BY55BP, NR-BY55BV(EN)(AU).indd 7
6/30/2559 BE 10:14 AM
6/30/2559 BE 10:14 AM
