26
Appendix
ECO NAVI Q&A
When does ECO NAVI
operate?
●
ECO NAVI by itself operates depending on the brightness around the
refrigerator, the change in the compartment temperature, frequency of door
opening and closing and the change in the volume of storage.
(ECO NAVI lamp lights up during ECO NAVI operation.)
ECO NAVI lamp is flashing
slowly
●
It indicates ECO NAVI is detecting the change in the volume of storage after
closing the door of the refrigerator compartment.
(For approximately 15 seconds.)
ECO NAVI lamp does not
light (ECO NAVI does not
operate)
●
ECO NAVI operates only when the temperature setting is “ 2 ” for both the
freezer and refrigerator compartments.
(The temperature setting of the Prime Fresh/Chilled select room has no
connection with ECO NAVI operation.)
●
When the temperature is adjusted in detail, ECO NAVI does not operate. (P. 22)
●
During FRESH FREEZING operation and QUICK ICE MAKING operation,
ECO NAVI does not operate.
●
If “U” or “H” is displayed on the notice indicator, ECO NAVI does not operate.
●
ECO NAVI does not operate until the refrigerator has been sufficiently cooled.
●
You can not force ECO NAVI to operate even when you want.
●
When you set the ECO NAVI lamp OFF, the lamp does not light up.
Cancel the ECO NAVI lamp OFF setting.
●
ECO NAVI does not operate if you store hot food or you frequently open and
close the doors.
●
The learning function may disable ECO NAVI operation in times of day when
the doors are frequently opened and closed, in order to cool the refrigerator
well.
●
If a power failure occurs, the collected learning function data will be lost.
ECO NAVI rarely operates until the learning function has collected sufficient
data.
ECO NAVI lamp does not
turn off.
●
When the light intensity sensor (P. 9) is hidden behind something or the panel
is dirty or scratched, the sensor may not work properly.
●
ECO NAVI may continuously operate depending on the temperature inside
the refrigerator compartment or the volume of storage even if the doors are
opened or closed, but the cooling capacity is maintained.
ECO NAVI lamp turns off
when the doors are not
opened and closed.
●
When (automatic) defrosting starts during ECO NAVI operation, for example,
ECO NAVI is stopped in order to perform normal cooling operation after the
defrosting.
●
The learning function may switch ECO NAVI operation back to normal cooling
operation.
ECO NAVI lamp does not
turn off despite storing a lot
of food.
●
The storage sensor (P. 8) works only in the refrigerator compartment.
The volume of stored food in other than the refrigerator compartment can not
be detected.
●
When food is stuffed in the compartments, the sensor may not detect the
change in the volume of storage properly and the lamp may not turn off.
(Especially when a lot of food is stored on the upper glass tray.)
●
When the storage sensor (P. 8) is hidden behind the food stored in the
compartments, the sensor may not detect the change in the volume of storage
properly and the lamp may not turn off.
ECO NAVI lamp turns off
despite storing a small
amount of food.
●
When food is stored near the storage sensor (P. 8), such as on the glass
shelf or in the door shelf, the sensor may mistakenly detect the change in the
volume of storage is large and the lamp may turn off.
●
When the doors are opened/closed frequently or the doors are left open for a
long time, the lamp may turn off.
