en-19
English
Appendix
Water supply tank / Water purification filter
Once a week
Remove the lid and clean
the water supply tank with
water.
Turn the water purification
filter to unhook and
remove it.
Gently rinse the water
purification filter.
Remove the packing
running on the edges from
the back. Clean it with
water.
Lid
Hook
Fit the water purification filter and the packing.
●
As a guide, replace the water purification filter every 3 years.
(Separately sold parts: P. 27)
●
If there is water scale on the water purification filter, ice may not be properly made.
Washable ice-making tray (Inside of the ice compartment)
Once or twice a year
■
Remove the ice-making tray and rinse it.
Press [AUTO ICE OFF] button for 3 seconds and stop ice making.
(The lamp turns on. P. 15)
Turn the knob in the ice compartment to the unlock position.
Pull forward the lever to pull out the ice-making tray.
Clean it with water. Do not rub the surface with a sponge etc.
(If the ice-making tray is scratched, ice may not be properly released,
leading to a malfunction.)
●
The ice-making tray and its frame can not be separated.
●
Do not use a dishwasher-dryer.
■
Installation
Push in until it makes a locking sound.
Turn the knob to the lock position.
Ice may not be made if the ice-making tray is not locked.
Press [AUTO ICE OFF] button for 3 seconds and re-start ice making.
(The lamp turns off. P. 15)
●
Ice is not made until [AUTO ICE OFF] is canceled.
●
Do not directly put water in the ice-making tray after cleaning.
(That may cause ice cubes sticking together or a malfunction.)
Knob
Lock position
Unlock position
Lever
Unlock position
Lock position
Case (Ice/Fresh Freezing/Freezer/Vegetable compartment)
Once every 3 months
Pull out at an angle
Pull out the door as far as
possible, and pull out at an
angle while lifting up the front.
Remove the aluminum plate
When the plate is installed,
set it in front side of the
protrusion.
Protrusion
Requests
●
The contact sections of the drawer rails have been
coated with lubricant. Do not wipe it off.
●
When the top case in the freezer compartment or the
small-item vegetable case has been removed, install by
positioning “
手前
FRONT” that is written on the bottom of
the case on the front side.
●
Do not touch the aluminum plate with wet hands, for
example when cleaning the plate.
(It may cause a freezing injury.)
●
When the case and the aluminum plate are washed,
install them after draining water and wiping the remaining
waterdrop.
