How to turn off Auto Ice maker
<RXFDQHQDEOHGLVDEOHWKH$XWR,FHPDNLQJPRGHDFFRUGLQJWR\RXUQHHGV
Turn off Auto Ice making
1
Choose the Auto Ice Off mode, the icon of the Auto Ice Off mode on the Operation Panel
will turn on and the refrigerator will stop making ice (Page 21).
2
No need to pour water in the Water tank. The remaining water inside the Water tank will
keep making ice, and ice cubes will be available after 2 hours. Or when the Ice box is full,
the Auto Ice making will be stopped.
3
When you want to continue making ice automatically, please choose the Auto Ice Off
mode, and the icon of the Auto Ice Off mode on the Operation Panel will turn off (Page 21).
Turn off Auto Ice making for a long period of time
1
Empty the Water tank and remove all ice cubes from the Ice box.
2
Clean the Water tank, Water filter, Water tank seal rubber and Ice box; dry and put them
back to their place.
3
When using again, please refill the Water tank and put it back.
When transporting the refrigerator
1
Empty the Water tank and remove all ice cubes from the Ice box.
2
Choose the Auto Ice Clean mode, the icon of Auto Ice Clean mode on the Operation Panel
will turn on and the refrigerator will start cleaning the ice maker. (At this time the ice cubes
and water in the process of making ice will fall into the Ice box)
3
The cleaning process will stop after 2 minutes. Take out the Ice box and empty the ice
cubes and water in the Ice box.
4
Clean the Water tank, Water filter and Ice box; dry and put them back to their place.
How to clean the Auto Ice Maker
:KHQXVLQJIRUWKH¿UVWWLPHRUZKHQQRWEHLQJXVHGDIWHUDORQJWLPHWKH:DWHUWDQNPD\
smell unpleasantly or collect dust. Remember to clean the Water tank before proceeding to
clean the ice maker.
After selecting the Auto Ice Clean mode, water will be automatically poured into the Ice tray
and water supply pipe 3 times (for about 2 minutes) to drain the water.
When selecting the ice maker cleaning mode, make sure there is enough water in the Water
tank.
1
Pull out the Ice box, remove all ice cubes from the Ice box (after the ice cubes are fully
formed), and then install the Ice box back.
2
Fill the Water tank with water.
3
Select the Auto Ice Clean mode (Page 21).
•
$WWKHVDPHWLPHWKHUHIULJHUDWRUZLOOVRXQGDQRWL¿FDWLRQDQGEHJLQWRFOHDQWKHLFH
maker.
• During the cleaning process, the sound cannot be turned off.
• After the beeping sound to inform the completion of the cleaning process, the icon of the
Auto Ice Clean mode on the Operation Panel will turn off, the ice maker cleaning process
will end and the Auto Ice making will be started.
4
Pull out the Ice box from the Freezer room, throw away the water in the Ice box and wipe
the water off.
If you do not clean all water on the Ice box, the Ice box may be broken.
26
