11
VQT9524
With some Satellite- or Digital Receivers it is possible to start a Timer
recording, with a 21-pin Scart cable (not supplied) by using EXT LINK
function. (Please read the operating instructions for your
Satellite- or Digital Receiver for further information).
VCR
Controls for external recordings
n
Press
m
n
Select [Other settings]
;
n
Access by pressing
o
n
Select [AV2]
;
(NV-FJ623EG/EGY = AV)
n
Select the input field
9
n
Select the settings
:;
n
Store by pressing
o
n
Press
e
After you have preset the recording in the
Satellite- or Digital Receiver, set the VCR
on Standby Recording by pressing
on the VCR .
As long as a video picture is being transmitted
by the Satellite- or Digital Receiver,
the VCR will record it.
This notice is displayed on the screen.
In order to delete this notice, press
o
.
To stop the recording, press the EXT LINK
Button on the VCR.
VCR display
VCR now recording
this programme
EXT LINK2 To control external recording
with some Satellite- or Digital Receiver (Videosignal).
EXT LINK1 For a Digital Receiver which transmits a special control signal for
recordings, for example the F.U.N. Receiver (TU-DSF31).
EXT
To connect an external equipment (e.g. TV),
the EXT LINK Button on the VCR is not activated.
(TV/EXT = NV-FJ623EG/EGY)
Note:
The programmes to be recorded on your VCR should not overlap
with the recordings of the Satellite- or Digital Receiver.
Panasonic VCR
Other settings
Tape length
: AUTO (
8
E-240)
SQPB
: AUTO
Power save
: OFF
VCR display
: DIMMED
OSD
: 4:3
AV2
: EXT LINK 2
TV
Receiver (not supplied)
AV2
Panasonic VCR
Main menu
Timer recording
Tuning
Clock setting
Other settings
Receiver
NV-FJ623EG/EGY = AV1
