VQT9524
2
Information
This equipment complies with European
conformity requirements, in accordance with
the conditions of electromagnetic compatibility
and product safety.
This equipment complies with the
requirements of protection class 2.
This equipment complies with the safety
requirements of the VDE.
(German Association of Electrical Engineers)
Warning and Important Information
Safety Information
AV1 (TV)
RF IN
RF OUT
AV2 (DECODER/EXT)
L
R
AV1 (TV)
RF IN
RF OUT
NV-FJ631, NV-FJ630, NV-FJ626
NV-FJ623EC/ECN
AV1 (TV)
RF IN
RF OUT
NV-FJ623EG/EGY
AV2 (DECODER/EXT)
Connections
AC IN~
AC IN~
AC IN~
AC IN~
= Power supply
AUDIO OUT
= Audio output (L=left channel R=right channel)
RF IN
= Antenna input
RF OUT
= Antenna output
AUDIO OUT
ƒ
„
…
…
Information about the Special
Features of this VCR see page 15.
n
This unit is intended for use in moderate climates.
n
Please observe copyright laws when recording sound tracks and film.
Caution !
n
Do not install, or place this unit, in a bookcase, built-in cabinet or in another
confined space. Ensure the unit is well ventilated. To prevent risk of electric
shockor fire hazard due to overheating, ensure that curtains and any other
materials do not obstruct the ventilation vents.
n
Do not obstruct the unit’s ventilation openings with newspapers,
tablecloths, curtains, and similar items.
n
Do not place sources of naked flames, such as lighted candles, on the unit.
n
Dispose of batteries in an environmentally friendly manner.
Batteries, packaging and old equipment should not be disposed of
as domestic waste, but in accordance with the applicable regulations.
“
‚
n
Do not remove outer cover to prevent electric shock. There are no user
serviceable parts inside. Refer all servicing to qualified service personnel.
n
Only transport and set up this equipment in a horizontal position.
n
Only connect cables when all the parts of this equipment are switched off.
n
Only clean the outside of this equipment, using a soft cloth and no cleaning fluid.
n
The mains lead must not be used for other equipment.
n
In case of rapid temperature changes, do not operate this equipment
for minimum of 1 hour.
Warning:
To reduce the risk of fire, electric shock or product damage, do not expose this
apparatus to rain, moisture, dripping or splashing and that no objects filled with
liquids, such as vases, shall be placed on the apparatus. This equipment,
the remote control, the mains lead must not be used if it is damaged.
Protect them from:
n
Direct sunlight, heat, cold, rain, wetness, oil, soiling and dust
n
Insertion of fingers or objects
n
Shock, vibrations and mechanical stress (do not bend the mains lead)
n
Electric and magnetic fields
n
Lightning strikes during thunderstorms (disconnect mains and aerial plugs)
Instructions on inserting Remote Control Batteries:
n
The lifetime of the battery is about 1 year, depending on the frequency of use.
n
Do not use one old and one new battery, or different types of batteries together
(e.g. one alkali and one zinc-carbon battery).
n
Only insert batteries which contain no toxic materials
(such as lead, cadmium, mercury).
n
Do not use rechargeable type batteries.
n
If the remote control will not be used for a long time,
remove the batteries and
store them in a cool and dry place.
n
Do not heat or short-circuit the batteries.
n
Remove empty batteries immediately and
replace them with type AA, UM3 or R6.
n
Observe the
P
and
Q
polarities
when replacing the batteries.
Conserve the environment:
n
See
Power save
on page 9.
