7
Auto Tuning Using the On Screen Display
Introduction
The VCR is tuned automatically by Plug in Auto Tuning.
However, Auto Tuning using the On Screen Display should
be performed according to the following method if necessary.
Preparations
– Confirm that the TV is on and the VCR viewing channel is
selected.
– Turn on the VCR and select any programme position
except A1 or A2.
– Set the VCR/TV switch
E
to [VCR].
Operations
1
Press the MENU button
U
to display
the Main menu on the TV screen.
2
Press the Cursor buttons (
34
34
34
34
34
)
S
to select [TUNER PRESET] then
press OK button
T
.
3
Press the Cursor buttons (
34
34
34
34
34
)
S
to select [AUTO TUNE] then press
the Cursor buttons (
21
21
21
21
21
)
S
to start
the Auto Tuning.
– When Auto Tuning is completed,
the On Screen Display disappears
and programme position 1 is
selected.
CH 1
CLEAR
[
OFF
]
AUDIO SYSTEM
[
BG
]
COLOUR SYSTEM
[
AUTO
]
AUTO TUNE
SEARCH
[
3
]
FINE
END :MENU
SELECT:
TUNER PRESET
LANGUAGE
CLOCK SET
TUNER PRESET
CH ADD&DELETE
G-CODE CH SET
SYSTEM
OPTION
MENU
SELECT
END
: , OK
:MENU
CH 1
SEARCH
END: MENU
100
AUTO TUNING
IN PROGRESS,
PLEASE WAIT.
LANGUAGE
CLOCK SET
TUNER PRESET
CH ADD&DELETE
G-CODE CH SET
SYSTEM
OPTION
MENU
SELECT
END
: , OK
:MENU
The number displayed here
is the number of channels
still to be auto tuned.
Notes:
– Auto Tuning searches for TV stations from VHF minimum to
UHF maximum and memorizes every tuned programme
position. Other programme positions are skipped.
– Auto Tuning takes five or more minutes to complete its
search.
– If the VCR is not correctly tuned by Auto Tuning, follow the
procedure on page 8.
Storing TV Broadcasts in Your
VCR
The VCR is fitted with its own tuner (just like a normal TV) and
can be preset to receive up to 99 TV broadcast stations.
Plug in Auto Tuning
When the VCR is turned on after connecting the aerial cable
and the mains lead, Auto Tuning starts.
Auto tuning searches for TV stations from VHF minimum to
UHF maximum and memorizes every tuned programme
position.
– If you turn the VCR off during Auto Tuning, Auto Tuning will
stop halfway.
– If the VCR starts playback during Auto Tuning, Auto Tuning
will stop halfway.
To Cancel Auto Tuning Mid-Operation:
Press the MENU button
U
during Auto Tuning. Auto Tuning
is cancelled.
To Restart Plug in Auto Tuning:
1
Press the EJECT button
[
and remove the video
cassette.
2
Keep the Channel buttons
N
on the VCR pressed
simultaneously for 3 seconds or more during the VCR on.
– The channel displayed on the VCR display disappears
for a moment then changes to 1.
3
Disconnect the mains lead and then reconnect it.
4
Turn off the VCR and then turn it on.
– Auto Tuning commences.
If Auto Tuning stops halfway by turning the VCR off,
playback or a power failure:
1
Disconnect the mains lead and then reconnect it.
2
Turn off the VCR and then turn it on.
– Auto Tuning commences.
CH 22
SEARCH
END: MENU
21
AUTO TUNING
IN PROGRESS,
PLEASE WAIT.
Disappears
1
Channels that can be Received
UHF
E21–E69
E21–E69
E21–E69
R1–R12
C1–C12
E2–E12
VHF
–
–
SYSTEM
CCIR Standard
(B.G.H)
Hong Kong
Special
Administrative
Region of China,
UK (I)
East Europe
(D.K.K1)
China
(D)
44–470MHz
C13–C57
Z1–Z35
S01–S05
M1–M10
U1–U10
S21–S41
CATV
D
K
I
B
G
