background image

8

Playback

For Normal Playback 

Press the [Play] 

(26)

.

For Cue or Review Playback 

During playback, tap the [Fast Forward] 

(25)

 or [Rewind] 

(8)

.

• To return to normal playback, press the 

[Play] 

(26)

.

• Press and hold down the [Fast Forward] 

(25)

 or [Rewind] 

(8)

. Cue or review 

playback continues for as long as you keep the button 
pressed.

For High speed Cue or Review Playback (JET SEARCH)

During playback, tap the [Fast Forward] 

(25)

 or [Rewind] 

(8)

 

twice. 

For Still Playback 

During playback, press the [Pause/Slow] 

(29)

.

• To return to normal playback, press the 

[Play] 

(26)

 or the [Pause/Slow] 

(29)

.

For Slow Playback 

During playback, keep the [Pause/Slow] 

(29)

 pressed for 2 seconds or more.

• To return to normal playback, press the 

[Play] 

(26)

.

Fast-forwarding or Rewinding the Tape

Press the [Fast Forward] 

(25)

 or [Rewind] 

(8)

 in the stop 

mode.
• To stop fast-forwarding or rewinding, press the [Stop] 

(9)

.

• To briefly view the picture during fast-forwarding or 

rewinding, press and hold down the corresponding button.

To Stop Playback

Press the [Stop] 

(9)

.

Notes:

• JET SEARCH, Cue, review or slow playback will be automatically 

cancelled after 10 minutes, and still playback after 5 minutes.

• During playback function other than normal playback, horizontal 

noise bars may appear in the picture, the colour of the picture may 
be unstable, or the picture may be otherwise distorted.
When you play back a tape recorded in the LP mode, the picture 
may be in black and white.
When you play back a tape recorded in the EP mode, the picture 
and the sound may be distorted.
However, these are not malfunctions.

To Play back S-VHS Cassette Tape 
(SQPB=S-VHS Quasi Playback)

It is also possible to play back tapes recorded in the S-VHS 
system.
• Some picture noise may occur depending on the type of 

tape used.

• It is not possible to fully obtain the high resolution that 

S-VHS is capable of.

• It is not possible to record in the S-VHS system with this 

VCR.

To Play back a Recorded Part Repeatedly

Press the [Play] 

(26)

 on the remote control for more than 5 

seconds.
The [R] indication appears on the TV screen.
• If [OSD] is set to [OFF] (See page 19), the [R] indication will 

not appear in repeat playback mode.

To Cancel the Repeat Playback Mode

Press the [Stop] 

(9)

.

To Rewind the Tape a Little to View the 
Same Scene Again (Replay Function)

Press the [REPLAY] 

(5)

.

Rewind the tape a little from its present position and play it 
back again.
• During review playback, when you press this button, the 

VCR briefly switches over to cue playback and play it back 
again.

• When the VCR is in the stop, rewind, fast-forward, slow 

playback, or standby mode, the Replay function does not 
work.

To Stop Playback Automatically
(Playback Off Timer Function)

If you set the playback duration, the playback will stop 
automatically. 
After the set playback time has elapsed, the VCR 
automatically stops playback and switches off.
During normal playback, press the [Play] 

(26)

 on the VCR 

for more than 2 seconds to put the VCR in the Playback Off 
Timer mode. 
After that, press this button on the VCR repeatedly until the 
desired playback duration is displayed on the VCR display.
• Repeatedly pressing this button changes the indication in 

the following order.

Counter display (normal playback mode)

#

30 (min.)

#

60 (min.)

#

120 (min.) 

#

180 (min.)

#

240 (min.) 

#

Counter display (normal playback mode)

To stop midway

Press the [Stop] 

(9)

Summary of Contents for NV-FJ732F

























Reviews: