53
VQT0T94
ª
Inserting/removing a card
Before inserting/removing a card, be sure to turn
the power [OFF].
≥
If the card is inserted or removed with the power
turned on, this camera may malfunction or the
data recorded on the card may be lost.
1
Open the LCD monitor and then open the
card slot cover.
2
Insert/remove the card into/from the card
slot.
≥
When inserting a card, face the label side
1
towards you and push it straight in with one
stroke as far as it goes.
≥
When removing the card, open the card slot
cover and press the centre of the card and
then pull it straight out.
3
Securely close the card slot cover.
ª
Turning the camera on
When the camera is turned on with the lens cap
fitted, the automatic white balance adjustment
may not function properly. Please turn the camera
on after removing the lens cap.
How to turn on the power
1
While pressing the button
1
, set the
[OFF/ON] switch to [ON].
≥
The status indicator lights up.
How to turn off the power
1
While pressing the button
1
, set the
[OFF/ON] switch to [OFF].
≥
The status indicator goes off.
1
OFF
ON
1
OFF
ON
1
VQT0T94SC.book 53 ページ ２００５年１１月２９日 火曜日 午後７時４５分
