Before using
7
VQT0N73
The one-touch free-style grip belt
ª
To use as a hand strap
If you use the grip belt as a hand strap, then you
can carry or handle this camera more easily.
1
Open the lock cover
1
by pinching the
projections
2
on both sides. Press the lock
button
3
to remove the grip belt.
≥
When removing the grip belt, tightly hold the
camera with both hands.
≥
After removing the grip belt, restore the lock
cover to the original position.
2
Adjust the belt length.
1
Flip the belt.
2
Slide
1
in the direction indicated by the arrow.
3
Fix the belt.
3
Put your hand through the strap.
≥
Use the free style remote control with mic for
more convenience.
≥
Hold the movie camera not to cover the
microphones or the sensors with your hands.
ª
To restore the strap to the grip belt
≥
When returning the grip belt to the grip belt
attachment part, press the lock cover
1
and
check if the grip belt is securely locked.
ª
To use as a grip belt
Adjust the belt length so it fits your hand.
1
Adjust the belt length and the pad position.
1
Flip the belt.
2
Adjust the length.
3
Fix the belt.
Using the LCD monitor
You can record the image while viewing it on the
LCD monitor opened.
1
Put a finger on the LCD monitor open part
and pull the LCD monitor out in the
direction of the arrow.
≥
The viewfinder will go off.
≥
It can open up to 90
o
.
2
Adjust the angle of the LCD monitor as you
prefer.
≥
It can rotate up to 180
o
1
towards the lens or
90
o
2
towards the viewfinder.
≥
The brightness and colour level of the LCD
monitor can be adjusted from the menu.
≥
If it is forcibly opened or rotated, the camera
may be damaged or fail.
≥
Check that the card slot cover is closed.
≥
When the LCD monitor is rotated by 180
o
towards the lens (when recording yourself), the
LCD monitor and the viewfinder will be
simultaneously activated.
2
1
3
1 3
2
1
1
1 3
2
OPEN
2
90
o
1
180
o
GS250GN.book 7 ページ ２００５年１月２６日 水曜日 午後１２時１７分
Summary of Contents for NV-GS250
Page 63: ...63 VQT0N73 ...
