Playback mode
86
VQT0N70
Deleting files recorded on a card
The deleted files cannot be restored.
≥
Set to Picture Playback Mode.
1
Move the joystick left or right to select a file
to delete.
≥
You can select a file in the multi-screen display.
After selecting the file, press the joystick and
display the operation icon.
2
Move the joystick down to select [
].
3
Move the joystick up or down in order to
select [DELETE 1 FILE] and then press it.
4
When the confirming message appears,
select [YES] and press the joystick.
≥
In order to stop deletion, select [NO].
ª
To delete all files
1
Move the joystick down to select [
].
2
Move the joystick up or down in order to
select [ALL FILES] and then press it.
3
When the confirming message appears,
select [YES] and press the joystick.
≥
In case of [ALL FILES], the deletion may take
time if there are many files on the card.
≥
When “CARD FULL” is shown during recording,
switch to the Picture Playback Mode and then
delete unnecessary files.
≥
If there are not any file to delete, insert a new
card.
≥
If files conforming to DCF standard are deleted,
all the data related to the files will be deleted.
ª
Deleting still picture files recorded on
a card by other equipment
≥
A still picture file (other than JPEG) that cannot
be played back on the movie camera may be
erased.
Formatting a card
Please be aware that if a card is formatted, then
all the data recorded on the card will be erased.
Store important data on a personal computer, etc.
≥
Set to Picture Playback Mode.
1
Set
[ADVANCE] >> [CARD FORMAT] >>
[YES].
2
When the confirmation message appears,
select [YES] and press the joystick in order
to format the card.
≥
In order to stop formatting, select [NO].
≥
Normally, it is not necessary to format the card.
If a message appears even though you insert
and remove the card several times, format it.
≥
Cards formatted on other equipment such as
personal computers cannot be used or
recording takes longer than expected. We
recommend formatting your card on this
camera.
Protecting files on a card
Files recorded on a card can be locked so that they
may not be deleted by mistake. (Even if the files are
locked, they will be deleted if the card is formatted.)
≥
Set to Picture Playback Mode.
1
Set
[BASIC] >> [PROTECT] >> [YES].
2
Move the joystick to select a file to be
locked, and then press it.
≥
[
] Indication
1
appears and the selected
file is locked. Press the joystick again, and
the lock will be cancelled.
≥
2 or more files can be locked in succession.
ª
To complete the settings
Press the [MENU] button.
1
GS250GC.book 86 ページ ２００４年１２月１８日 土曜日 午後１時３５分
