Edit mode
34
LSQT1005
Edit mode
Copying onto a DVD recorder or a
VCR
(Dubbing)
Pictures recorded by the movie camera can be
stored on a DVD-RAM or other such media. Refer
to the instructions for the recorder.
≥
Place a recorded cassette in the movie
camera, and an unrecorded DVD-RAM or
cassette in the DVD
recorder or VCR.
1
Connect the movie camera and the
recorder.
Connecting with the AV cable
≥
Connect the movie camera and the recorder
by using the
AV cable
1
.
Connecting with the optional DV cable
(Only for equipment with a DV terminal)
2
Turn on the movie camera and set to Tape
Playback Mode.
3
Select the input channel on the TV set and
recorder.
4
Move the joystick up to select the [
1
/
;
]
icon to start playback. (Player)
≥
The image and sound are reproduced.
5
Start recording. (Recorder)
6
Stop recording. (Recorder)
7
Move the joystick down to select the [
∫
]
icon to stop playback. (Player)
≥
For more information, refer to the operating
instructions for your TV set and recorder.
≥
When you do not need functional indications or
date and time indication, set [BASIC] >>
[DATE/TIME] >> [OFF] in the Tape Playback
Mode and press the [EXT DISPLAY] button on
the remote control for no indication.
(When you connect the movie camera and a
recorder with the DV cable, these indications
may not appear.)
ª
When neither image nor sound from
the movie camera is output to the TV
set
≥
Check that the plugs are inserted as far as they
go.
≥
Check the [12bit AUDIO] settings. (
-35-
)
≥
Check the connected terminal.
Using the DV Cable for Recording
(Digital Dubbing)
By connecting other digital video equipment with
DV terminal and the movie camera by using the
DV cable VW-CD1E (optional)
1
, high-image-
quality dubbing can be done in digital format.
This model cannot be used as a Recorder.
≥
Set to Tape Playback Mode.
(Player/recorder)
1
Connect the movie camera and digital video
equipment with the DV cable.
2
Start playback. (Player)
3
Start recording. (Recorder)
4
Stop playback. (Player)
≥
Do not plug or unplug the DV cable during
dubbing, or the dubbing may not be completed
properly.
≥
Even if you use a device equipped with DV
terminals such as IEEE1394, you may not be
able to perform digital dubbing in some cases.
For more information, see the instructions for
equipment connected.
≥
Regardless of the menu settings on the
recorder, digital dubbing is carried out in the
same mode as the [AUDIO REC] mode of the
playback tape.
≥
The images on the recorder monitor may be
disturbed, but it does not affect the recorded
images.
1
[VIDEO IN]
[AUDIO IN]
A/V
2
(L2)
(L2)
S
/
DV
1
DV
DV
LSQT1005ENG.book 34 ページ ２００５年１２月１６日 金曜日 午後３時１１分
