Panasonic NV-GS27EP Operating Instructions Manual Download

Page: 43 / 204

Others

LSQT1005

Playback (Pictures)
1: Mosaic-pattern noise appears on images

during cue or review playback.

• This phenomenon is characteristic of digital

video systems. It is not a malfunction.

2: Horizontal stripes appear on images during

cue and review playback.

• Horizontal stripes may appear depending on

the scene, but this is not a malfunction.

3: Although the movie camera is correctly

connected to a TV, playback images cannot
be seen.

• Have you selected video input on the TV?

Please read the operating instructions of your
TV and select the channel that matches the
input terminals used for the connection.

4: Playback picture is not clear.

• Are the heads of the movie camera dirty? If the

heads are dirty, playback image cannot be
clear. Clean the heads by using the head
cleaner for digital video (optional). (

-44-

)

• If the terminal for the AV cable is soiled, noises

may appear on the screen. Wipe the soil off the
terminal with a soft cloth, and then connect the
cable to the AV terminal.

• Is a picture containing a copyright protection

signal (copy guard) being recorded? When a
protected picture is played back by the movie
camera, mosaic-like patterns appear on the
picture.

Others
1: The indication disappears, the screen is

frozen, or no operation can be performed.

• Turn off the power to the movie camera. If the

power cannot be turned off, press the [RESET]
button, or detach the battery or the AC adaptor
and then reattach it. After that, turn on the
power again. If normal operation is still not
restored, detach the power connected, and
consult the dealer who you purchased the
movie camera from.

2: “PUSH THE RESET SWITCH” is displayed.

• An irregularity in the movie camera has been

automatically detected. Remove the cassette
for data protection and then press the [RESET]
button. The movie camera will be activated.

• If you do not press the [RESET] button, the

power to the movie camera is turned off
automatically about 1 minute later.

• Even after you press the [RESET] button, the

indication may still appear repeatedly. If so, the
movie camera needs repair. Detach the power
connected, and consult the dealer who you
purchased the movie camera from. Do not
attempt to repair the appliance by yourself.

3: Even if connected by the USB

cable, the

movie camera is not recognized by the PC.

• Is the USB driver installed? For information,

refer to the operating instructions for PC
connection (separate volume).

4: When the USB cable is disconnected, an

error message will appear on PC.

• To disconnect the USB cable safely,

double-click the [

] icon in the task tray and

follow the instructions on the screen.

5: The movie camera malfunctions on editing,

dubbing from digital video equipment, or
using “MotionDV STUDIO 5.6E LE for DV”
or “SweetMovieLife”. (NV-GS37 only)

• If a tape is recorded in multiple modes such as

SP and LP (recording mode), 12 bit and 16 bit
(sound recording mode), normal and wide,
recorded and unrecorded parts, the movie
camera may malfunction at a point where the
mode switches. When you edit, do not record in
multiple modes.

6: The warning/alarm indication [

] appears

when the camera is operated in the WEB
camera mode.

• Did you press the menu button or the recording

start/stop button? You cannot use the menu or
record onto the tape in the WEB camera mode.

• Is the setting for the remote control correct?
• Did you attempt to play a tape without inserting

it? Insert a tape.

• Did you attempt to play a tape with copyright

protection (copy guard)? Pictures of the tape
with copyright protection (copy guard) cannot
be displayed on the PC. (The audio of the tape
can be played.)

• Is the USB driver installed? For details, refer to

the operating instructions for PC connection.

LSQT1005ENG.book 43 ページ２００５年１２月１６日　金曜日　午後３時１１分