Before Use
-14-
ª
Accidental Erasure Prevention
Opening the accidental erasure prevention slider
1
on the cassette (by sliding it in the [SAVE]
arrow direction) prevents recording. To enable
recording, close the accidental erasure
prevention slider (by sliding it in the [REC] arrow
direction).
≥
For other notes concerning this item, see
-58-
.
Turning on the Movie Camera and
Selecting Modes
Turn on the power first and then select modes.
ª
How to Turn on the Power
1
Set the [OFF/ON/MODE] Switch
(49)
to [ON]
while pressing the button
1
.
≥
The [CAMERA] Lamp
(47)
lights up.
ª
How to Switch Modes
2
Rotate the [OFF/ON/MODE] Switch
(49)
.
≥
With each rotate, the Mode changes.
≥
The appropriate Mode Lamp lights up.
ª
How to Turn off the Power
3
Set the [OFF/ON/MODE] Switch
(49)
to
[OFF] while pressing the button
1
.
R E C
SAVE
1
CAMERA
VCR
CARD PB
OF
F ON MODE
1
(47)
(49)
OF
F ON MODE
(49)
OF
F ON MODE
(49)
1
Using the Viewfinder/LCD Monitor
ª
Using the Viewfinder
Before using the Viewfinder, adjust the field of
view so that the displays inside the Viewfinder
become clear and easy to read.
1
Tilt up the Viewfinder.
≥
The Viewfinder can also be pulled out for use.
≥
Do not pull on the Eyecup to extend the
Viewfinder.
2
Adjust by sliding the Eyepiece Corrector
Knob
(56)
.
ª
Using the LCD Monitor
With the LCD Monitor open, you can also record
the picture while watching it.
1
Press the [PUSH OPEN] Button
(2)
and pull
the LCD Monitor
(3)
out about 90
o
in the
direction of the arrow.
≥
The Viewfinder goes off.
2
Adjust the LCD Monitor angle according to
the desired recording angle.
≥
The LCD Monitor can rotate a maximum of
180
o
1
from the vertical position to the
upward direction and a maximum of 90
o
2
to
the downward direction. Forcefully rotating
the LCD Monitor beyond these ranges will
damage the Movie Camera.
12:30:45
15.10.2003
12:30:45
15.10.2003
12:30:45
15.10.2003
12:30:45
15.10.2003
(56)
PUSH
OPEN
(2)
(3)
2
90
o
1
180
o
70B-ENG.book 14 ページ ２００３年３月２７日 木曜日 午前１１時５３分
