VFK0823FSE
(For end users)
Note:
The tape material itself is the same in both types.
2.4. SELF-DIAGNOSIS RESULT DISPLAY
The "SELF-DIAGNOSIS RESULT DISPLAY & MEMORY function is built in this VTR.
It means that when the VCR detects undesirable condition, it can be displayed a “Error code
(Two numbers from the left)” with Service Mode 2.
Since the "Error code" is stored in the EEPROM, it can be displayed although after
disconnected the AC leads. It can be displayed with Service Mode 2.
(If a second error had been detected, only the most recent error can be displayed. )
For more details, refer to the Service Manual for Z-Mechanism Chassis Order number
VRD9802005C2.
NOTE:
To erase the memorized “ERROR” code, press the FF and EJECT
keys simultaneously for more than 5 seconds.
12
Summary of Contents for NV-HS880EG
