Model No.
Model
Code
Option
Code 1
Option
Code 2
Option
Code 3
NV-HS880EG
161
(A1h)
8
(08h)
240
(F0h)
0
(00h)
NV-HS880B
163
(A3h)
40
(28h)
240
(F0h)
0
(00h)
NV-HS880EC
162
(A2h)
8
(08h)
240
(F0h)
0
(00h)
NV-HS880EE
166
(A6h)
8
(08h)
242
(F2h)
0
(00h)
Fig. S2 Model Code & Option Code
NOTE:
1. Tune the TV Broadcasting channels by referring the memo.
2. Since all electrical adjustment data is still not available, perform
the Electrical Adjustment continuously.
WHEN REPLACING THE MAIN C.B.A.
Since the user's Tape Library data is stored in IC6002;EEPROM, swap the EEPROM taking from
Original Main C.B.A. and mount it onto the New Main C.B.A. to keep maintain the user's Library
Data by ordering the following procedure.
1. Take the IC6002; EEPROM from the new Main C.B.A. (to be used
as replacement.) and keep it aside.
2. Take the IC6002; EEPROM from the original Main C.B.A. (to be
replaced).
3. Mount the EEPROM being taken from original C.B.A. to the new
Main C.B.A.(to be used as replacement.)
4. Install the new Main C.B.A. to the VCR.
When ordering the above procedure, setting of the model code, option code, tuning channel can
be skipped. / However, all electrical adjustment data is unique value in accordance with a deck,
perform the Electrical Adjustment continuously.
2.1.2. CYLINDER UNIT REPLACEMENT
1. CYLINDER UNIT REPLACEMENT
A. Remove the mechanism unit from MAIN C.B.A./Chassis by
5
Summary of Contents for NV-HS880EG
