SV120
HV60 HV65 HV55 HV50 MV20
SV121 HV61 HV51 MV21 MV16
OFF-TIMER
Time limited recording or playback
During recording, playback or stop mode the device
switches to stand-by after a preset period of time.
Press the button repeatedly to increase this period from
30 to 60, 120, 180 or 240 minutes.
The set time appears in the VCR’s display.
!
Press
OFF-TIMER
26
Normal playback
!
Turn on the VCR.
!
Be sure the TV set is turned on and tuned to the video
playback channel.
!
Insert a video cassette.
!
Press
PLAY
to start playback.
!
Press
STOP
to end playback.
Playback
Repeat playback
The VCR repeats playback from beginning to the end of
the recording.
!
In stop or playback mode press
PLAY
for longer
than 5 seconds.
The symbol [R] appears on the VCR´s display.
!
Press
STOP
to end playback.
Starting automatic playback
When inserting a cassette with removed protection tab,
playback will start automatically.
Playback from power stand-by mode
When inserting a cassette and pressing
PLAY
,
the device will turn itself on and start playing back.
Normally the VCR automatically adjusts the playback
picture to the highest possible quality. Sometimes it
may be necessary though to adjust the picture
manually.
Picture noise or unclear picture during playback.
(Tracking)
!
While in regular playback
or in slow motion press
programme selection button
(-) or (+) until the noise
disappears.
If noise appears in a still
picture, first switch VCR
to slow motion, then
adjust tracking.
D
In some video cassettes tracking can not
be adjusted. This is not indicative of a VCR
malfunction.
Automatic tracking control
!
Simultaneously press
(-) and
(+).
The still picture runs up or down
!
In still playback mode hold
(-) or
(+)
until the picture stands still.
D
On some TV sets special playback functions may
cause the picture to shift up or down. This is not
a VCR malfunction.
Optimising the playback picture quality
