C. Rotate the Main Cam Gear counter-clockwise (
Fig. S9
) until just
before the unloading would be completed as shown in
Fig. S3
.
D. Rotate the Capstan Motor clockwise (
Fig. S9
) to remove the
slack tape as shown in
Fig. S6
.
Fig. S9
E. Rotate the Main Cam Gear counter-clockwise again (
Fig. S9
) to
remove the cassette-tape as shown in
Fig. S7
.
F. Set the Position Switch to EJECT POSITION certainly as shown
in
Fig. S10
.
Fig. S10
12
