No Terminal Name I/O
Description
P.OFF
P.Failure
Reset/
Release
89 MESECAM (H)
I
Distinction terminal for the Video system.
1. In the VV mode.
*"High" is input: Playback of a MESECAM recorded tape.
*"Low" is input: Playback of other than MESECAM recorder tape.
2. In the EE mode.
*"High" is input: Receiving a SECAM broadcast, or a SECAM signal is input.
NOTE:
*In case of model having MESECAM / SECAM REC/PLAY, the video system is
controlled with above result.
*In case of model do not having MESECAM / SECAM REC/PLAY, the above result is
invalidated.
In
In
In
90 CYL.PFG
I
Input terminal for the Cylinder PG/FG.
In
In
In
91 OREF
O 1/2 VDD reference voltage output terminal for the Analogue AMP.
Out
Out
Out
92 IREF
I
1/2 VDD reference voltage input terminal for the Analogue AMP.
In
In
In
93 GND
I
GND
In
In
In
94 CTL.HEAD(-)
I/O I/O terminal for the Control head (-)
In/Out
In/Out
In/Out
95 CTL.HEAD(+)
I/O I/O terminal for the Control head (+)
In/Out
In/Out
In/Out
96 CTL.AMP.REF
I
Capacitor connection terminal for reference of the control AMP.
In
In
In
97 PB.CTL.OUT
O Output terminal for the Control AMP.
Out
Out
Out
98 5V(A)
-
Power supply terminal for Analogue AMP.
-
-
-
99 5V(AD)
-
Reference power supply terminal for the AD/8bit DA
-
-
-
100 NTSC (L)
O PLAYBACK MODE…..50Hz:"High" 60Hz:"Low"
Low
Low
Low
