Advanced Operations
45
44
Title
Procedure
Remarks, etc.
Searching for the Beginning of
Recorded Scenes Marked with
Index Signal
(Index Search)
∫
Searching for Photoshot Pictures
(Photoshot Index Search)
≥
Slide the [OFF/ON/MODE] Switch from the [ON]
position to put the Movie Camera in the VCR Mode.
≥
Set [SEARCH] on the [PLAYBACK FUNCTIONS]
Sub-Menu to [PHOTO].
∫
Searching for the Beginning of Recorded
Scenes (Scene Index Search)
≥
Slide the [OFF/ON/MODE] Switch from the [ON]
position to put the Movie Camera in the VCR Mode.
≥
Set [SEARCH] on the [PLAYBACK FUNCTIONS]
Sub-Menu to [SCENE].
Photoshot Index Search
in Forward Direction
Press the Index Button
[
9
] on the Remote
Controller.
Scene Index Search in
Forward Direction
Press the Index Button
[
9
] on the Remote
Controller.
Photoshot Index Search
in Reverse Direction
Press the Index Button
[
:
] on the Remote
Controller.
Scene Index Search in
Reverse Direction
Press the Index Button
[
:
] on the Remote
Controller.
≥
At every press of the corresponding button, the tape
is fast-forwarded or rewound to the next still picture
recorded in the Photoshot Mode.
After reaching the next still picture, the still picture is
played back continually, however the sound only for
approximately 4 seconds. (If you leave the Movie
Camera in the Still Playback Mode for more than
6 minutes, it switches over to the Stop Mode to
protect the video heads against excessive wear.)
≥
When you briefly press the corresponding button
once, the [S 1] Indication appears and the search
for the next scene marked with an index signal
starts.
After the Scene Index Search has started, every
time you press the button, the indication changes
successively from [S 2] to [S 9], and the beginning
of the scene corresponding to the selected number
is located.
After reaching the desired scene, playback starts
automatically.
(At a time, Scene Index Search in forward or
reverse direction is possible up to the ninth scene
marked with index signal from the present tape
position.)
≥
The Photoshot Index Search Function may not work
correctly for still pictures recorded near the beginning
of the tape.
≥
As no photoshot index signals are recorded for still
pictures recorded in the Continuous Photoshot Mode
(p. 31), the Photoshot Index Search Function cannot
be used to search for these still pictures.
≥
If you keep the [
:
] or [
9
] Button pressed for
more than 2 seconds, the Intro Search Function is
activated and it plays back all still pictures recorded
in the Photoshot Mode on the cassette one after
another for a few seconds each.
(To cancel the Intro Search Function, press the Play
Button [
1
] or the Stop Button [
∫
].)
≥
If the interval between two scene index signals is less
than 1 minute, the Scene Index Search Function may
not work correctly.
≥
The Scene Index Search Function may not work
correctly for scenes recorded near the beginning of
the tape.
≥
If you keep the [
:
] or [
9
] Button pressed for
more than 2 seconds, the Intro Search Function is
activated and it plays back the beginning of all
scenes marked with an index signal on the cassette
one after another for a few seconds each.
(To cancel the Intro Search Function, press the Play
Button [
1
] or the Stop Button [
∫
].)
VCR Mode
CAMERA Mode
SCENEINDEX
REC SPEED
AUDIO REC 12bit
RETURN
---- YES
SP
2HOUR DAY
WIND CUT
OFF
ZOOM MIC
OFF
RECORDING SETUP
PRESS MENU TO EXIT
BLANK SEARCH ---- YES
RETURN
RECORD TO CARD ---- YES
AUTO PRINT ---- YES
---- YES
PLAYBACK FUNCTIONS
PRESS MENU TO EXIT
SEARCH
PHOTO SCENE
12bit AUDIO
ST1
AUDIO OUT
STEREO
SHUTTER/IRIS
MENU
W.B
VOL/JOG
PUSH
AE LOCK
MNL
AUTO
PLAY
PAUSE
/ITEM
STOP
/SET
REW/
6
SLOW
SLOW
STILL ADV
INDEX
INDEX
STILL ADV
FF/
5
1
6
5
9
:
;
∫
INDEX
9
INDEX
:
S 3
INDEX
9
INDEX
:
∫
Index Search
To allow easy searching for desired scenes, this
Movie Camera automatically records index
signals during recording as follows:
(While an index signal is
being recorded, the
[INDEX] Indication flashes
for a few seconds.)
Photoshot Index Signal
To search for still pictures recorded in the
Photoshot Mode (p. 30) and to use for Automatic
Printing Function. (p. 106)
A photoshot index signal is automatically
recorded every time you record a still picture in
the Photoshot Mode.
However, in the Continuous Photoshot Mode
(p. 31), no photoshot index signals are recorded.
Scene Index Signal
To search for the beginning of recorded scenes.
A scene index signal is automatically recorded in
the following cases:
≥
When you start recording after inserting a
cassette.
However, if you switch the Movie
Camera from the VCR Mode over to the
Camera Mode or set the date and/or time
before you start recording, no index signal
is recorded.
≥
According to the setting of [SCENEINDEX] on
the [RECORDING SETUP] Sub-Menu of the
[CAMERA FUNCTIONS] Main-Menu:
[2HOUR]: An index signal is recorded when
recording is restarted after a lapse of
more than 2 hours.
[DAY]:
An index signal is recorded when
recording is restarted after the date
has changed since the last
recording.
INDEX