6. SERVICING POSITION
Install the Mechanism Unit on to the MAIN C.B.A..
Then fix a screw (H), and connect two frexible card Connectors
(Cylinder connector, AC Head connector) and P1531 as shown in
Fig. D5
.
Fig. D8
3.2. MECHANICAL ADJUSTMENT PROCEDURES
Refer to the Service Manual for R4-Mechanism Chassis.
(Order No. VRD0202010C8)
CAUTIONS:
To turn on the Adjustment Mode for Tape Interchangeability, set to
the service mode 2 as follows.
(Auto Tracking is turned off.)
1. Press the FF and EJECT buttons simultaneously for 3 seconds.
2. Press the FF and EJECT buttons simultaneously more once to set
the Service Mode 2.
16
