24
Settings Using the On-Screen Display
Press [
34
] to select the item and press [
2 1
] to change the
setting.
¬
To exit the settings screen
Press
[MENU]
twice.
OPTION
0
SLOW/SEARCH
NAVI
TOP MENU
MENU
RETURN
PROG/CHECK
PROG PLAY
DISPLAY
JET REW
TIMER
ENTER
PLAY
LIST
INDEX/SKIP
AV
DIRECT
NAVIGATOR
CANCEL/RESET
ANGLE/PAGE
INPUT SELECT
MUSIC w/ PICTURE
PICTURE
SPEED
AUDIO
POSITION MEMORY
SETUP
ZOOM
REPEAT
PLAY MODE
A.SRD
CINEMA
SUBTITLE
-/- -
MENU
AUDIO
ENTER
CANCEL/
RESET
DISPLAY
OPTION 1/2
TAPE SELECT
[AUTO]
NTSC INPUT SELECT
[AUTO]
NTSC PB SELECT
[onPALTV]
JET NAVIGATOR
[OFF]
DELETE NAVIDATA
[NO]
OSD REC
[OFF]
OSD [AUTO]
OUT[VHS/DVD] [AUTO]
END :MENU
SELECT:
OPTION 2/2
DUBBING NORMAL AUDIO
[L]
MONAURAL [OFF]
END :MENU
SELECT:
e.g. NV-VP31GN
Items
Settings
(Underlined items are the initial setting.)
TAPE SELECT
Set the length of tape you are using so the unit can show the correct
remaining time (
l
page 25).
AUTO:
E30, E60, E90, E120, E180 and E240 tapes
E195:
E195 tapes
E260:
E260 tapes
E300:
E300 tapes
NTSC INPUT SELECT
Select the colour TV system used to record NTSC signals.
AUTO:
NTSC [4.43] and [3.58] signals
≥
If the tape has not recorded correctly, select 4.43 or 3.58.
4.43:
NTSC 4.43 signals
3.58:
NTSC 3.58 signals
≥
Some programmes on NTSC 3.58 system cannot be recorded
correctly at this position.
NTSC PB SELECT
Select the colour TV system of the TV used to play back a tape
recording NTSC signals.
on PAL TV: TVs that can receive PAL signals
4.43:
TVs that can receive NTSC 4.43 signals
3.58:
TVs that can receive NTSC 3.58 signals
JET NAVIGATOR
(
l
page 20)
ON:
Jet Navigator data automatically registered.
OFF:
Data not registered.
≥
If you select “ON”, “OSD REC” is set to “OFF” automatically.
DELETE NAVIDATA
See page 20 to delete data on a single tape.
NO
ENTER:
If you choose this position, press
[ENTER]
to delete
all the Jet Navigator data.
OSD REC
You can record the present date and time on the same screen
which the picture is recorded.
ON
OFF
≥
If you select “ON”, “JET NAVIGATOR” is set to “OFF”
automatically.
OSD (
l
page 25)
AUTO:
Messages appear on the TV for about 5 seconds
when you press
[DISPLAY]
.
OFF:
Messages do not appear.
OUT [VHS/DVD] (
l
page 12)
You can set the unit so that the output is automatically switched to
the device which starts playback.
VHS:
Only VHS outputs.
MANUAL: VHS output and DVD output are manually switched.
AUTO:
VHS and DVD are automatically switched depending
on the manipulation or the unit operation.
DUBBING NORMAL AUDIO (
l
page 42)
Select the audio channel to be recorded on the Normal audio track
when dubbing a bilingual DVD.
L:
To record the sound from left channel
R:
To record the sound from right channel
MONAURAL
Select the sound mode. (For NV-VP31GN only)
ON:
To record the normal sound during a NICAM
broadcast or if the stereo sound is distorted due to
inferior reception conditions.
OFF
VP31GL.book 24 ページ ２ ０ ０ ３ 年 ７ 月 ３ ０ 日 水曜日 午後 ８ 時 ２ ２ 分
