RQTV0115
17
Recording
VHS
Operations
17
You can start recording quickly and set a duration.
During recording, press [
¥
REC/OTR] on the unit
repeatedly.
Select the desired recording duration.
≥
Each time you press the button, the indication on the unit’s display
changes as follows:
Counter display (normal recording mode)
>
30 (min)
>
60 (min)
>
90 (min)
>
120 (min)
>
180 (min)
>
240 (min)
>
Current time (normal recording mode)
≥
The unit will automatically switch off when OTR is completed.
¬
To stop OTR at any time
Press
[
∫
STOP]
or
[
Í
/I] (
Í
VHS)
.
Notes:
≥
The OTR function works during normal recording only.
≥
When the tape reaches its end during OTR, the unit will turn itself
off.
You can record from other video sources (VHS, camera, etc.).
≥
Connect the other equipment to this unit as shown. If audio output
on the other equipment is monaural, use a stereo-monaural
conversion cable (not supplied).
≥
Insert a recorded video cassette with an intact erasure prevention
tab.
≥
Set A1 or A2 with
[INPUT SEL]
to select the audio/video source
required.
.........................................................................................................................................................................................................................
[1] Press [
1
PLAY].
Find the recording start
point.
.............................................................................................
[2] Press [
;
/
D
PAUSE],
then press [
¥
REC].
Put the unit in recording
standby mode.
.............................................................................................
[3] Start play on the
other equipment.
.............................................................................................
[4] Press
[
;
/
D
PAUSE]
to start recording.
¬
To stop recording
Press
[
∫
STOP]
.
You can delete all the contents of a video cassette (the picture and
sound data).
.........................................................................................................................................................................................................................
[1] Insert the cassette
that you want to
refresh and press
[MENU].
.............................................................................................
[2] Press [
34
] to
select “TAPE
REFRESH” and then
press [ENTER].
.............................................................................................
[3] Press [ENTER] for
2 seconds or more
to start the tape
refresh function.
The tape refresh function
starts.
≥
The tape is rewound to the
beginning and is then
erased as it is fast-
forwarded.
≥
When the end of the video
cassette is reached, the
unit automatically rewinds it
to the beginning.
Note:
≥
When a video cassette with a broken erasure prevention tab is
inserted, this function is not activated.
One-Touch Recording (OTR)
Recording from an External Source
S
TOP
REC/OTR
AUDIO
OUT
L
R
VIDEO
OUT
AV2 IN (AUDIO/VIDEO)
AV1 IN (AUDIO/VIDEO)
Other VHS or Video
movie camera
(Not supplied)
Tape Refresh
VHS
MENU
CLOCK SET
TUNE
LANGUAGE
R PRESET
SYSTEM
OPT I ON
TAPE REFRESH
SELECT : , ENTER
END : M
ENU
VP60GCS.book Page 17 Monday, March 6, 2006 3:23 PM
