Panasonic Omnivision PV-C2542 Service Manual Download

Page: 172 / 251

Timer Operation

Repeat steps 1 and 2 on page 22.

CANCEL : ADD / DLT
SELECT 1 - 8 :
ENTER   :
END    : PROG / ACT I ON

P DT START STOP CH SPD

1 day

day 9

9 : 00

00p 12

12 : 00

00a

2 8  10 : 00a 12 : 00p 125   SP
3 10   8 : 00p  9 : 00p  10   SP
4 SU   9 : 00p 10 : 00p L   LP

8 SAT

SAT 9:00

00P

P 12

12: 00

00A 08

TODAY

----------------------------------------------

DATE START STOP CH

ABC
SP

SELE CT

START

START DAT

ATE

SELECT :
SET    :
END    : PROG / ACT I ON

Press PROG twice (or ACTION)
to exit this mode.

To Replace program...

To Clear program...

Press

to select

the desired program.

1) Press to display.
2) Press

to select

and press or
to set new program
contents.

3) Press PROG (or

ACTION).

Cancel a Timer Recording:
(Recording is in progress)

Hold down STOP for a few seconds
to cancel the Timer Recording.

• Any future daily or weekly recordings

will be performed as programmed.

Press ADD/DLT.

Review, Replace or Clear Program
Contents :

(Recording is not in progress)

• 2 minutes before Timer recording is performed,

“PLEASE PREPARE FOR TIMER REC” appears and/
or the PROG TIMER Indicator flashes. Be sure a
cassette with record tab is loaded and the unit is in
Stop mode.

• If the start times of two programs overlap, the lower

numbered program will have priority.

• If the start time for a Timer Recording comes up during

a normal recording or One Touch Recording (page 12),
the Timer Recording will not be performed.

• If there is a power interruption of more than one minute,

the recording may not be performed or continued.

• If “INCOMPLETE” appears after all items have been

set, check all entries and make necessary corrections.

Notes

SELECT/SET

:CH UP

:CH DOWN

:VOL UP
:VOL DOWN

ADD/DLT

PROG

STOP

P DT START STOP CH SPD

-- --

-- -- : --

-- : --

-- --

2 8  10 : 00p 12 : 00a 125   SP
3 10   8 : 00p  9 : 00p  10   SP
4 SU   9 : 00p 10 : 00p L   LP

SELECT 1 - 8 :
ENTER   :
END    : PROG / ACT I ON

*Important: If a remote control button does not work when pressed, press the COMBO button

on the remote and try the button again.

Model PV-C2062 remote shown.

LSQT0582A_P22-33.p65

12/14/2001, 1:52 PM

Summary of Contents for Omnivision PV-C2542




























































































































































































































































Search results

Summary of Contents for Omnivision PV-C2542

Reviews:

Related manuals for Omnivision PV-C2542

Brands by name

Popular brands

Panasonic Omnivision PV-C2542, Service Manual

Search results

Summary of Contents for Omnivision PV-C2542

Reviews:

Related manuals for Omnivision PV-C2542

Brands by name

Popular brands